[DeTomaso] polish ZF cost estimate
John Taphorn
jtaphorn at kingwoodcable.com
Sun Sep 14 20:03:00 EDT 2014
Either dark ford blue or black. Lighter colors look bad in a very short
time as road grime etc coat them.
JT
On 9/14/2014 6:16 PM, Boyd Casey wrote:
> An unrelated question. A Since I am having a rebuilt engine installed
> (a 408 stroked Cleveland, SVO A-3 heads, A331 intake, 180 degree
> ceramic coated headers, custom built carb . My engine compartment is
> totally refinished with painted surfaces (in black) SS. fire wall cover
> SS bottles and water pipes. What is the consensus A concerning the
> engine block paint. Should I go with standard Ford blue, black to match
> the engine compartment or some other color?
>
> On Sun, Sep 14, 2014 at 5:03 PM, Julian Kift
> <[1]julian_kift at hotmail.com> wrote:
>
> A A Maybe air coming up from under the car doesn't hit as much
> turbulence
> A A from the now blingy polished surfaces, so you can go faster :>)
> That's
> A A probably why a polished ZF gets hotter!
> A A
> A __________________________________________________________________
> A A Date: Sun, 14 Sep 2014 13:51:40 -0700
> A A From: [2]b.hower3400 at yahoo.com
> A A Subject: Re: [DeTomaso] polish ZF cost estimate
> A A To: [3]julian_kift at hotmail.com; [4]mikeldrew at aol.com;
> [5]cengles at cox.net
> A A CC: [6]detomaso at poca.com; [7]michael at michaelshortt.com
>
> A A When you are running at 140/150 at SSCC or BBORR who will know if
> it is
> A A polished?
> A A Bud #3400 ( Drive it like there is no tomorrow -- for there may
> not be
> A A ! )
> A A
> A __________________________________________________________________
> A A From: Julian Kift <[8]julian_kift at hotmail.com>
> A A To: "[9]MikeLDrew at aol.com" <[10]mikeldrew at aol.com>; Charles Engles
> A A <[11]cengles at cox.net>
> A A Cc: De Tomaso List <[12]detomaso at poca.com>;
> "[13]michael at michaelshortt.com"
> A A <[14]michael at michaelshortt.com>
> A A Sent: Sunday, September 14, 2014 1:22 PM
> A A Subject: Re: [DeTomaso] polish ZF cost estimate
> A A A Let's face it polishing requires a lot of fine grit wet & dry
> A A A sandpaper, rags, metal polishes (of varying grit) and a lot of
> elbow
> A A A grease full stop. You can either put in that effort or pay for
> the
> A A wear
> A A A and tear on someone elses elbows.
> A A A What we haven't talked about is what you set yourself up for in
> A A A continued maintenance by having a polished ZF. You are at some
> point
> A A A going to have to put in more elbow grease to maintain that
> shiny
> A A look,
> A A A unless of course you are either a) of sufficient economic
> stature and
> A A A wealth you "Have people to do that for you" or b) want to take
> the ZF
> A A A out each year for a repolish.
> A A A Of course you could try to seal the polished surface, but I
> think
> A A that
> A A A raises even more concerns on sealing in heat.
> A A A Julian
> A A A > Date: Sun, 14 Sep 2014 10:48:02 -0700
> A A A > To: [1][15]cengles at cox.net
> A A A > CC: [2][16]detomaso at poca.com;
> [3][17]michael at michaelshortt.com
> A A A > Subject: Re: [DeTomaso] polish ZF cost estimate
> A A A > From: [4][18]detomaso at poca.com
> A A A >
> A A A > Another thought--polishing requires a lot of manipulation and
> it
> A A A would be easy to drop the gearbox and damage it.
> A A A >
> A A A > Dumb idea in other words. :)
> A A A >
> A A A > Masochists have don't it in the car but they are relying on
> rags,
> A A A metal polish and elbow grease....
> A A A >
> A A A > Mike
> A A A >
> A A A > Sent from my iPhone
> A A A >
> A A A > On Sep 14, 2014, at 10:38, "Charles Engles"
> <[5][19]cengles at cox.net>
> A A wrote:
> A A A >
> A A A > > Dear Guys,
> A A A > >
> A A A > >
> A A A > > One other consideration of the polisher working on a fully
> A A A assembled and presumably, fully functional, *expensive* ZF: if
> after
> A A a
> A A A careful and proper polish job *any* malfunction or problem
> occurs
> A A with
> A A A the pretty polished ZF, then all eyes and finger would point to
> the
> A A A polisher. He probably wouldn't want that grief and headache.
> A A A > >
> A A A > >
> A A A > > Worst case scenario, Chuck Engles
> A A A > >
> A A A > >
> A A A > >
> A A A > >
> A A A > > -----Original Message-----
> A A A > > From: DeTomaso [mailto:[6][20]detomaso-bounces at poca.com] On
> Behalf Of
> A A A [7][21]michael at michaelshortt.com
> A A A > > Sent: Sunday, September 14, 2014 9:34 AM
> A A A > > To: boyd casey
> A A A > > Cc: Mike Drew; [8][22]detomaso at poca.com
> A A A > > Subject: Re: [DeTomaso] polish ZF cost estimate
> A A A > >
> A A A > > IMHO...I think it would just be a big PIA, so heavy and
> hard to
> A A A move around in the multistep process.
> A A A > >
> A A A > > Michael
> A A A > > On Sep 14, 2014 9:56 AM, "Boyd Casey"
> <[9][23]boyd411 at gmail.com>
> A A wrote:
> A A A > >
> A A A > >> Mike,
> A A A > >> Do you think that polishing a fully assembled ZF presents
> A a
> A A risk
> A A A to
> A A A > >> damaging the transaxle? You mentioned people polishing a
> Trans
> A A A axle
> A A A > >> while it was still installed. I have posted warnings
> against
> A A sand
> A A A > >> blasting and even wet bead blasting while one has an
> engine or
> A A A > >> transaxle installed. I know from A information passed on
> to me
> A A by
> A A A my
> A A A > >> friend who owns a new water based glass bead blasting
> business
> A A A that
> A A A > >> even with substantial efforts made to protect the engine
> or
> A A tranny
> A A A it
> A A A > >> is very easy to have a A nominal amount of glass beading
> find
> A A it's
> A A A way
> A A A > >> into the engine or transmission and that's A the death
> knoll for
> A A A > >> either. A I wasn't aware of similar risks to the ZF A due
> to
> A A A polishing.
> A A A > >> Thanks,
> A A A > >> Boyd
> A A A > >>
> A A A > >> On Sun, Sep 14, 2014 at 12:58 AM, Mike Drew
> A A <[1][10][24]MikeLDrew at aol.com>
> A A A > >> wrote:
> A A A > >>
> A A A > >> I think Lloyd Butfoy charges $1200 for polishing. Of
> course he
> A A A would
> A A A > >> never do it with the gearbox assembled.
> A A A > >> I double any professional polisher will either.
> A A A > >> Mike
> A A A > >> Sent from my iPhone
> A A A > >>
> A A A > >> On Sep 13, 2014, at 21:55, Boyd Casey
> <[2][11][25]boyd411 at gmail.com>
> A A A wrote:
> A A A > >>> A A Just out of curiosity, I know there will be a wide
> variance
> A A A but
> A A A > >> what do
> A A A > >>> A A you think we be a reasonable price to polish a fully
> A A A assembled zf
> A A A > >> dash
> A A A > >>> A A -2 with bell housing outside the car. Detached from
> the
> A A motor
> A A A and
> A A A > >>> A A delivered to a polishing shop. Do you think it would
> be
> A A A necessary
> A A A > >> to
> A A A > >>> A A take any steps to protect the ZF from intrusion of
> polish
> A A or
> A A A any
> A A A > >> other
> A A A > >>> A A potential problems?
> A A A > >>
> A A A > >>> _______________________________________________
> A A A > >>>
> A A A > >>> Detomaso Forum Managed by POCA
> A A A > >>>
> A A A > >>> DeTomaso mailing list
> A A A > >>> [3][12][26]DeTomaso at poca.com
> A A A > >>>
> [4][13][27]http://poca.com/mailman/listinfo/detomaso_poca.com
> A A A > >>
> A A A > >> References
> A A A > >>
> A A A > >> 1. mailto:[14][28]MikeLDrew at aol.com
> A A A > >> 2. mailto:[15][29]boyd411 at gmail.com
> A A A > >> 3. mailto:[16][30]DeTomaso at poca.com
> A A A > >> 4.
> [17][31]http://poca.com/mailman/listinfo/detomaso_poca.com
> A A A > >>
> A A A > >> _______________________________________________
> A A A > >>
> A A A > >> Detomaso Forum Managed by POCA
> A A A > >>
> A A A > >> DeTomaso mailing list
> A A A > >> [18][32]DeTomaso at poca.com
> A A A > >> [19][33]http://poca.com/mailman/listinfo/detomaso_poca.com
> A A A > >
> A A A >
> A A A > _______________________________________________
> A A A >
> A A A > Detomaso Forum Managed by POCA
> A A A >
> A A A > DeTomaso mailing list
> A A A > [20][34]DeTomaso at poca.com
> A A A > [21][35]http://poca.com/mailman/listinfo/detomaso_poca.com
> A A _______________________________________________
> A A Detomaso Forum Managed by POCA
> A A DeTomaso mailing list
> A A [22][36]DeTomaso at poca.com
> A A [23][37]http://poca.com/mailman/listinfo/detomaso_poca.com
> References
> A A 1. mailto:[38]cengles at cox.net
> A A 2. mailto:[39]detomaso at poca.com
> A A 3. mailto:[40]michael at michaelshortt.com
> A A 4. mailto:[41]detomaso at poca.com
> A A 5. mailto:[42]cengles at cox.net
> A A 6. mailto:[43]detomaso-bounces at poca.com
> A A 7. mailto:[44]michael at michaelshortt.com
> A A 8. mailto:[45]detomaso at poca.com
> A A 9. mailto:[46]boyd411 at gmail.com
> A 10. mailto:[47]MikeLDrew at aol.com
> A 11. mailto:[48]boyd411 at gmail.com
> A 12. mailto:[49]DeTomaso at poca.com
> A 13. [50]http://poca.com/mailman/listinfo/detomaso_poca.com
> A 14. mailto:[51]MikeLDrew at aol.com
> A 15. mailto:[52]boyd411 at gmail.com
> A 16. mailto:[53]DeTomaso at poca.com
> A 17. [54]http://poca.com/mailman/listinfo/detomaso_poca.com
> A 18. mailto:[55]DeTomaso at poca.com
> A 19. [56]http://poca.com/mailman/listinfo/detomaso_poca.com
> A 20. mailto:[57]DeTomaso at poca.com
> A 21. [58]http://poca.com/mailman/listinfo/detomaso_poca.com
> A 22. mailto:[59]DeTomaso at poca.com
> A 23. [60]http://poca.com/mailman/listinfo/detomaso_poca.com
>
> _______________________________________________
> Detomaso Forum Managed by POCA
> DeTomaso mailing list
> [61]DeTomaso at poca.com
> [62]http://poca.com/mailman/listinfo/detomaso_poca.com
>
> References
>
> 1. mailto:julian_kift at hotmail.com
> 2. mailto:b.hower3400 at yahoo.com
> 3. mailto:julian_kift at hotmail.com
> 4. mailto:mikeldrew at aol.com
> 5. mailto:cengles at cox.net
> 6. mailto:detomaso at poca.com
> 7. mailto:michael at michaelshortt.com
> 8. mailto:julian_kift at hotmail.com
> 9. mailto:MikeLDrew at aol.com
> 10. mailto:mikeldrew at aol.com
> 11. mailto:cengles at cox.net
> 12. mailto:detomaso at poca.com
> 13. mailto:michael at michaelshortt.com
> 14. mailto:michael at michaelshortt.com
> 15. mailto:cengles at cox.net
> 16. mailto:detomaso at poca.com
> 17. mailto:michael at michaelshortt.com
> 18. mailto:detomaso at poca.com
> 19. mailto:cengles at cox.net
> 20. mailto:detomaso-bounces at poca.com
> 21. mailto:michael at michaelshortt.com
> 22. mailto:detomaso at poca.com
> 23. mailto:boyd411 at gmail.com
> 24. mailto:MikeLDrew at aol.com
> 25. mailto:boyd411 at gmail.com
> 26. mailto:DeTomaso at poca.com
> 27. http://poca.com/mailman/listinfo/detomaso_poca.com
> 28. mailto:MikeLDrew at aol.com
> 29. mailto:boyd411 at gmail.com
> 30. mailto:DeTomaso at poca.com
> 31. http://poca.com/mailman/listinfo/detomaso_poca.com
> 32. mailto:DeTomaso at poca.com
> 33. http://poca.com/mailman/listinfo/detomaso_poca.com
> 34. mailto:DeTomaso at poca.com
> 35. http://poca.com/mailman/listinfo/detomaso_poca.com
> 36. mailto:DeTomaso at poca.com
> 37. http://poca.com/mailman/listinfo/detomaso_poca.com
> 38. mailto:cengles at cox.net
> 39. mailto:detomaso at poca.com
> 40. mailto:michael at michaelshortt.com
> 41. mailto:detomaso at poca.com
> 42. mailto:cengles at cox.net
> 43. mailto:detomaso-bounces at poca.com
> 44. mailto:michael at michaelshortt.com
> 45. mailto:detomaso at poca.com
> 46. mailto:boyd411 at gmail.com
> 47. mailto:MikeLDrew at aol.com
> 48. mailto:boyd411 at gmail.com
> 49. mailto:DeTomaso at poca.com
> 50. http://poca.com/mailman/listinfo/detomaso_poca.com
> 51. mailto:MikeLDrew at aol.com
> 52. mailto:boyd411 at gmail.com
> 53. mailto:DeTomaso at poca.com
> 54. http://poca.com/mailman/listinfo/detomaso_poca.com
> 55. mailto:DeTomaso at poca.com
> 56. http://poca.com/mailman/listinfo/detomaso_poca.com
> 57. mailto:DeTomaso at poca.com
> 58. http://poca.com/mailman/listinfo/detomaso_poca.com
> 59. mailto:DeTomaso at poca.com
> 60. http://poca.com/mailman/listinfo/detomaso_poca.com
> 61. mailto:DeTomaso at poca.com
> 62. http://poca.com/mailman/listinfo/detomaso_poca.com
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
-------------- next part --------------
Either dark ford blue or black. Lighter colors look bad in a very
short time as road grime etc coat them.
JT
On 9/14/2014 6:16 PM, Boyd Casey wrote:
An unrelated question. A Since I am having a rebuilt engine installed
(a 408 stroked Cleveland, SVO A-3 heads, A331 intake, 180 degree
ceramic coated headers, custom built carb . My engine compartment is
totally refinished with painted surfaces (in black) SS. fire wall cover
SS bottles and water pipes. What is the consensus A concerning the
engine block paint. Should I go with standard Ford blue, black to match
the engine compartment or some other color?
On Sun, Sep 14, 2014 at 5:03 PM, Julian Kift
[1]<[1]julian_kift at hotmail.com> wrote:
A A Maybe air coming up from under the car doesn't hit as much
turbulence
A A from the now blingy polished surfaces, so you can go faster :>)
That's
A A probably why a polished ZF gets hotter!
A A
A __________________________________________________________________
A A Date: Sun, 14 Sep 2014 13:51:40 -0700
A A From: [[2]2]b.hower3400 at yahoo.com
A A Subject: Re: [DeTomaso] polish ZF cost estimate
A A To: [[3]3]julian_kift at hotmail.com; [[4]4]mikeldrew at aol.com;
[[5]5]cengles at cox.net
A A CC: [[6]6]detomaso at poca.com; [[7]7]michael at michaelshortt.com
A A When you are running at 140/150 at SSCC or BBORR who will know if
it is
A A polished?
A A Bud #3400 ( Drive it like there is no tomorrow -- for there may
not be
A A ! )
A A
A __________________________________________________________________
A A From: Julian Kift [8]<[8]julian_kift at hotmail.com>
A A To: [9]"[9]MikeLDrew at aol.com" [10]<[10]mikeldrew at aol.com>; Charles Engle
s
A A [11]<[11]cengles at cox.net>
A A Cc: De Tomaso List [12]<[12]detomaso at poca.com>;
[13]"[13]michael at michaelshortt.com"
A A [14]<[14]michael at michaelshortt.com>
A A Sent: Sunday, September 14, 2014 1:22 PM
A A Subject: Re: [DeTomaso] polish ZF cost estimate
A A A Let's face it polishing requires a lot of fine grit wet & dry
A A A sandpaper, rags, metal polishes (of varying grit) and a lot of
elbow
A A A grease full stop. You can either put in that effort or pay for
the
A A wear
A A A and tear on someone elses elbows.
A A A What we haven't talked about is what you set yourself up for in
A A A continued maintenance by having a polished ZF. You are at some
point
A A A going to have to put in more elbow grease to maintain that
shiny
A A look,
A A A unless of course you are either a) of sufficient economic
stature and
A A A wealth you "Have people to do that for you" or b) want to take
the ZF
A A A out each year for a repolish.
A A A Of course you could try to seal the polished surface, but I
think
A A that
A A A raises even more concerns on sealing in heat.
A A A Julian
A A A > Date: Sun, 14 Sep 2014 10:48:02 -0700
A A A > To: [1][[15]15]cengles at cox.net
A A A > CC: [2][[16]16]detomaso at poca.com;
[3][[17]17]michael at michaelshortt.com
A A A > Subject: Re: [DeTomaso] polish ZF cost estimate
A A A > From: [4][[18]18]detomaso at poca.com
A A A >
A A A > Another thought--polishing requires a lot of manipulation and
it
A A A would be easy to drop the gearbox and damage it.
A A A >
A A A > Dumb idea in other words. :)
A A A >
A A A > Masochists have don't it in the car but they are relying on
rags,
A A A metal polish and elbow grease....
A A A >
A A A > Mike
A A A >
A A A > Sent from my iPhone
A A A >
A A A > On Sep 14, 2014, at 10:38, "Charles Engles"
[19]<[5][19]cengles at cox.net>
A A wrote:
A A A >
A A A > > Dear Guys,
A A A > >
A A A > >
A A A > > One other consideration of the polisher working on a fully
A A A assembled and presumably, fully functional, *expensive* ZF: if
after
A A a
A A A careful and proper polish job *any* malfunction or problem
occurs
A A with
A A A the pretty polished ZF, then all eyes and finger would point to
the
A A A polisher. He probably wouldn't want that grief and headache.
A A A > >
A A A > >
A A A > > Worst case scenario, Chuck Engles
A A A > >
A A A > >
A A A > >
A A A > >
A A A > > -----Original Message-----
A A A > > From: DeTomaso [mailto:[6][[20]20]detomaso-bounces at poca.com] On
Behalf Of
A A A [7][[21]21]michael at michaelshortt.com
A A A > > Sent: Sunday, September 14, 2014 9:34 AM
A A A > > To: boyd casey
A A A > > Cc: Mike Drew; [8][[22]22]detomaso at poca.com
A A A > > Subject: Re: [DeTomaso] polish ZF cost estimate
A A A > >
A A A > > IMHO...I think it would just be a big PIA, so heavy and
hard to
A A A move around in the multistep process.
A A A > >
A A A > > Michael
A A A > > On Sep 14, 2014 9:56 AM, "Boyd Casey"
[23]<[9][23]boyd411 at gmail.com>
A A wrote:
A A A > >
A A A > >> Mike,
A A A > >> Do you think that polishing a fully assembled ZF presents
A a
A A risk
A A A to
A A A > >> damaging the transaxle? You mentioned people polishing a
Trans
A A A axle
A A A > >> while it was still installed. I have posted warnings
against
A A sand
A A A > >> blasting and even wet bead blasting while one has an
engine or
A A A > >> transaxle installed. I know from A information passed on
to me
A A by
A A A my
A A A > >> friend who owns a new water based glass bead blasting
business
A A A that
A A A > >> even with substantial efforts made to protect the engine
or
A A tranny
A A A it
A A A > >> is very easy to have a A nominal amount of glass beading
find
A A it's
A A A way
A A A > >> into the engine or transmission and that's A the death
knoll for
A A A > >> either. A I wasn't aware of similar risks to the ZF A due
to
A A A polishing.
A A A > >> Thanks,
A A A > >> Boyd
A A A > >>
A A A > >> On Sun, Sep 14, 2014 at 12:58 AM, Mike Drew
A A [24]<[1][10][24]MikeLDrew at aol.com>
A A A > >> wrote:
A A A > >>
A A A > >> I think Lloyd Butfoy charges $1200 for polishing. Of
course he
A A A would
A A A > >> never do it with the gearbox assembled.
A A A > >> I double any professional polisher will either.
A A A > >> Mike
A A A > >> Sent from my iPhone
A A A > >>
A A A > >> On Sep 13, 2014, at 21:55, Boyd Casey
[25]<[2][11][25]boyd411 at gmail.com>
A A A wrote:
A A A > >>> A A Just out of curiosity, I know there will be a wide
variance
A A A but
A A A > >> what do
A A A > >>> A A you think we be a reasonable price to polish a fully
A A A assembled zf
A A A > >> dash
A A A > >>> A A -2 with bell housing outside the car. Detached from
the
A A motor
A A A and
A A A > >>> A A delivered to a polishing shop. Do you think it would
be
A A A necessary
A A A > >> to
A A A > >>> A A take any steps to protect the ZF from intrusion of
polish
A A or
A A A any
A A A > >> other
A A A > >>> A A potential problems?
A A A > >>
A A A > >>> _______________________________________________
A A A > >>>
A A A > >>> Detomaso Forum Managed by POCA
A A A > >>>
A A A > >>> DeTomaso mailing list
A A A > >>> [3][12][[26]26]DeTomaso at poca.com
A A A > >>>
[4][13][27][27]http://poca.com/mailman/listinfo/detomaso_poca.com
A A A > >>
A A A > >> References
A A A > >>
A A A > >> 1. mailto:[14][[28]28]MikeLDrew at aol.com
A A A > >> 2. mailto:[15][[29]29]boyd411 at gmail.com
A A A > >> 3. mailto:[16][[30]30]DeTomaso at poca.com
A A A > >> 4.
[17][31][31]http://poca.com/mailman/listinfo/detomaso_poca.com
A A A > >>
A A A > >> _______________________________________________
A A A > >>
A A A > >> Detomaso Forum Managed by POCA
A A A > >>
A A A > >> DeTomaso mailing list
A A A > >> [18][[32]32]DeTomaso at poca.com
A A A > >> [19][33][33]http://poca.com/mailman/listinfo/detomaso_poca.com
A A A > >
A A A >
A A A > _______________________________________________
A A A >
A A A > Detomaso Forum Managed by POCA
A A A >
A A A > DeTomaso mailing list
A A A > [20][[34]34]DeTomaso at poca.com
A A A > [21][35][35]http://poca.com/mailman/listinfo/detomaso_poca.com
A A _______________________________________________
A A Detomaso Forum Managed by POCA
A A DeTomaso mailing list
A A [22][[36]36]DeTomaso at poca.com
A A [23][37][37]http://poca.com/mailman/listinfo/detomaso_poca.com
References
A A 1. mailto:[[38]38]cengles at cox.net
A A 2. mailto:[[39]39]detomaso at poca.com
A A 3. mailto:[[40]40]michael at michaelshortt.com
A A 4. mailto:[[41]41]detomaso at poca.com
A A 5. mailto:[[42]42]cengles at cox.net
A A 6. mailto:[[43]43]detomaso-bounces at poca.com
A A 7. mailto:[[44]44]michael at michaelshortt.com
A A 8. mailto:[[45]45]detomaso at poca.com
A A 9. mailto:[[46]46]boyd411 at gmail.com
A 10. mailto:[[47]47]MikeLDrew at aol.com
A 11. mailto:[[48]48]boyd411 at gmail.com
A 12. mailto:[[49]49]DeTomaso at poca.com
A 13. [50][50]http://poca.com/mailman/listinfo/detomaso_poca.com
A 14. mailto:[[51]51]MikeLDrew at aol.com
A 15. mailto:[[52]52]boyd411 at gmail.com
A 16. mailto:[[53]53]DeTomaso at poca.com
A 17. [54][54]http://poca.com/mailman/listinfo/detomaso_poca.com
A 18. mailto:[[55]55]DeTomaso at poca.com
A 19. [56][56]http://poca.com/mailman/listinfo/detomaso_poca.com
A 20. mailto:[[57]57]DeTomaso at poca.com
A 21. [58][58]http://poca.com/mailman/listinfo/detomaso_poca.com
A 22. mailto:[[59]59]DeTomaso at poca.com
A 23. [60][60]http://poca.com/mailman/listinfo/detomaso_poca.com
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
[[61]61]DeTomaso at poca.com
[62][62]http://poca.com/mailman/listinfo/detomaso_poca.com
References
1. [63]mailto:julian_kift at hotmail.com
2. [64]mailto:b.hower3400 at yahoo.com
3. [65]mailto:julian_kift at hotmail.com
4. [66]mailto:mikeldrew at aol.com
5. [67]mailto:cengles at cox.net
6. [68]mailto:detomaso at poca.com
7. [69]mailto:michael at michaelshortt.com
8. [70]mailto:julian_kift at hotmail.com
9. [71]mailto:MikeLDrew at aol.com
10. [72]mailto:mikeldrew at aol.com
11. [73]mailto:cengles at cox.net
12. [74]mailto:detomaso at poca.com
13. [75]mailto:michael at michaelshortt.com
14. [76]mailto:michael at michaelshortt.com
15. [77]mailto:cengles at cox.net
16. [78]mailto:detomaso at poca.com
17. [79]mailto:michael at michaelshortt.com
18. [80]mailto:detomaso at poca.com
19. [81]mailto:cengles at cox.net
20. [82]mailto:detomaso-bounces at poca.com
21. [83]mailto:michael at michaelshortt.com
22. [84]mailto:detomaso at poca.com
23. [85]mailto:boyd411 at gmail.com
24. [86]mailto:MikeLDrew at aol.com
25. [87]mailto:boyd411 at gmail.com
26. [88]mailto:DeTomaso at poca.com
27. [89]http://poca.com/mailman/listinfo/detomaso_poca.com
28. [90]mailto:MikeLDrew at aol.com
29. [91]mailto:boyd411 at gmail.com
30. [92]mailto:DeTomaso at poca.com
31. [93]http://poca.com/mailman/listinfo/detomaso_poca.com
32. [94]mailto:DeTomaso at poca.com
33. [95]http://poca.com/mailman/listinfo/detomaso_poca.com
34. [96]mailto:DeTomaso at poca.com
35. [97]http://poca.com/mailman/listinfo/detomaso_poca.com
36. [98]mailto:DeTomaso at poca.com
37. [99]http://poca.com/mailman/listinfo/detomaso_poca.com
38. [100]mailto:cengles at cox.net
39. [101]mailto:detomaso at poca.com
40. [102]mailto:michael at michaelshortt.com
41. [103]mailto:detomaso at poca.com
42. [104]mailto:cengles at cox.net
43. [105]mailto:detomaso-bounces at poca.com
44. [106]mailto:michael at michaelshortt.com
45. [107]mailto:detomaso at poca.com
46. [108]mailto:boyd411 at gmail.com
47. [109]mailto:MikeLDrew at aol.com
48. [110]mailto:boyd411 at gmail.com
49. [111]mailto:DeTomaso at poca.com
50. [112]http://poca.com/mailman/listinfo/detomaso_poca.com
51. [113]mailto:MikeLDrew at aol.com
52. [114]mailto:boyd411 at gmail.com
53. [115]mailto:DeTomaso at poca.com
54. [116]http://poca.com/mailman/listinfo/detomaso_poca.com
55. [117]mailto:DeTomaso at poca.com
56. [118]http://poca.com/mailman/listinfo/detomaso_poca.com
57. [119]mailto:DeTomaso at poca.com
58. [120]http://poca.com/mailman/listinfo/detomaso_poca.com
59. [121]mailto:DeTomaso at poca.com
60. [122]http://poca.com/mailman/listinfo/detomaso_poca.com
61. [123]mailto:DeTomaso at poca.com
62. [124]http://poca.com/mailman/listinfo/detomaso_poca.com
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
[125]DeTomaso at poca.com
[126]http://poca.com/mailman/listinfo/detomaso_poca.com
References
1. mailto:[1]julian_kift at hotmail.com
2. mailto:2]b.hower3400 at yahoo.com
3. mailto:3]julian_kift at hotmail.com
4. mailto:4]mikeldrew at aol.com
5. mailto:5]cengles at cox.net
6. mailto:6]detomaso at poca.com
7. mailto:7]michael at michaelshortt.com
8. mailto:[8]julian_kift at hotmail.com
9. mailto:[9]MikeLDrew at aol.com
10. mailto:[10]mikeldrew at aol.com
11. mailto:[11]cengles at cox.net
12. mailto:[12]detomaso at poca.com
13. mailto:[13]michael at michaelshortt.com
14. mailto:[14]michael at michaelshortt.com
15. mailto:15]cengles at cox.net
16. mailto:16]detomaso at poca.com
17. mailto:17]michael at michaelshortt.com
18. mailto:18]detomaso at poca.com
19. mailto:[5][19]cengles at cox.net
20. mailto:20]detomaso-bounces at poca.com
21. mailto:21]michael at michaelshortt.com
22. mailto:22]detomaso at poca.com
23. mailto:[9][23]boyd411 at gmail.com
24. mailto:[1][10][24]MikeLDrew at aol.com
25. mailto:[2][11][25]boyd411 at gmail.com
26. mailto:26]DeTomaso at poca.com
27. http://poca.com/mailman/listinfo/detomaso_poca.com
28. mailto:28]MikeLDrew at aol.com
29. mailto:29]boyd411 at gmail.com
30. mailto:30]DeTomaso at poca.com
31. http://poca.com/mailman/listinfo/detomaso_poca.com
32. mailto:32]DeTomaso at poca.com
33. http://poca.com/mailman/listinfo/detomaso_poca.com
34. mailto:34]DeTomaso at poca.com
35. http://poca.com/mailman/listinfo/detomaso_poca.com
36. mailto:36]DeTomaso at poca.com
37. http://poca.com/mailman/listinfo/detomaso_poca.com
38. mailto:38]cengles at cox.net
39. mailto:39]detomaso at poca.com
40. mailto:40]michael at michaelshortt.com
41. mailto:41]detomaso at poca.com
42. mailto:42]cengles at cox.net
43. mailto:43]detomaso-bounces at poca.com
44. mailto:44]michael at michaelshortt.com
45. mailto:45]detomaso at poca.com
46. mailto:46]boyd411 at gmail.com
47. mailto:47]MikeLDrew at aol.com
48. mailto:48]boyd411 at gmail.com
49. mailto:49]DeTomaso at poca.com
50. http://poca.com/mailman/listinfo/detomaso_poca.com
51. mailto:51]MikeLDrew at aol.com
52. mailto:52]boyd411 at gmail.com
53. mailto:53]DeTomaso at poca.com
54. http://poca.com/mailman/listinfo/detomaso_poca.com
55. mailto:55]DeTomaso at poca.com
56. http://poca.com/mailman/listinfo/detomaso_poca.com
57. mailto:57]DeTomaso at poca.com
58. http://poca.com/mailman/listinfo/detomaso_poca.com
59. mailto:59]DeTomaso at poca.com
60. http://poca.com/mailman/listinfo/detomaso_poca.com
61. mailto:61]DeTomaso at poca.com
62. http://poca.com/mailman/listinfo/detomaso_poca.com
63. mailto:julian_kift at hotmail.com
64. mailto:b.hower3400 at yahoo.com
65. mailto:julian_kift at hotmail.com
66. mailto:mikeldrew at aol.com
67. mailto:cengles at cox.net
68. mailto:detomaso at poca.com
69. mailto:michael at michaelshortt.com
70. mailto:julian_kift at hotmail.com
71. mailto:MikeLDrew at aol.com
72. mailto:mikeldrew at aol.com
73. mailto:cengles at cox.net
74. mailto:detomaso at poca.com
75. mailto:michael at michaelshortt.com
76. mailto:michael at michaelshortt.com
77. mailto:cengles at cox.net
78. mailto:detomaso at poca.com
79. mailto:michael at michaelshortt.com
80. mailto:detomaso at poca.com
81. mailto:cengles at cox.net
82. mailto:detomaso-bounces at poca.com
83. mailto:michael at michaelshortt.com
84. mailto:detomaso at poca.com
85. mailto:boyd411 at gmail.com
86. mailto:MikeLDrew at aol.com
87. mailto:boyd411 at gmail.com
88. mailto:DeTomaso at poca.com
89. http://poca.com/mailman/listinfo/detomaso_poca.com
90. mailto:MikeLDrew at aol.com
91. mailto:boyd411 at gmail.com
92. mailto:DeTomaso at poca.com
93. http://poca.com/mailman/listinfo/detomaso_poca.com
94. mailto:DeTomaso at poca.com
95. http://poca.com/mailman/listinfo/detomaso_poca.com
96. mailto:DeTomaso at poca.com
97. http://poca.com/mailman/listinfo/detomaso_poca.com
98. mailto:DeTomaso at poca.com
99. http://poca.com/mailman/listinfo/detomaso_poca.com
100. mailto:cengles at cox.net
101. mailto:detomaso at poca.com
102. mailto:michael at michaelshortt.com
103. mailto:detomaso at poca.com
104. mailto:cengles at cox.net
105. mailto:detomaso-bounces at poca.com
106. mailto:michael at michaelshortt.com
107. mailto:detomaso at poca.com
108. mailto:boyd411 at gmail.com
109. mailto:MikeLDrew at aol.com
110. mailto:boyd411 at gmail.com
111. mailto:DeTomaso at poca.com
112. http://poca.com/mailman/listinfo/detomaso_poca.com
113. mailto:MikeLDrew at aol.com
114. mailto:boyd411 at gmail.com
115. mailto:DeTomaso at poca.com
116. http://poca.com/mailman/listinfo/detomaso_poca.com
117. mailto:DeTomaso at poca.com
118. http://poca.com/mailman/listinfo/detomaso_poca.com
119. mailto:DeTomaso at poca.com
120. http://poca.com/mailman/listinfo/detomaso_poca.com
121. mailto:DeTomaso at poca.com
122. http://poca.com/mailman/listinfo/detomaso_poca.com
123. mailto:DeTomaso at poca.com
124. http://poca.com/mailman/listinfo/detomaso_poca.com
125. mailto:DeTomaso at poca.com
126. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list