[DeTomaso] Headlights don't go up, take II
thomas
thomas at hax.se
Mon Sep 1 03:47:22 EDT 2014
If Charlie's car is similar to mine there are no normal "trim rings", see attached photo. I guess it can still be a related problem.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.jpeg
Type: image/jpeg
Size: 140099 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20140901/e27dd9bf/attachment.jpeg>
-------------- next part --------------
> 1 sep 2014 kl. 09:13 skrev "Tomas Gunnarsson" <guson at home.se>:
>
> If the trim ring comes off its clips, maybe it could cause this
> problem? You may benefit from removing the front wheels and splash
> shields. You should be able to reach around the bucket and take a photo
> of what's undeneath the fender in front of the bucket.
>
>
>
> Tomas
> <-----Ursprungligt Meddelande----->
>
> From: Charles McCall [charlesmccall at gmail.com]
> Sent: 31/8/2014 7:38:04 PM
> To: will.kooiman at gmail.com;jb841 at cox.net;detomaso at poca.com
> Subject: Re: [DeTomaso] Headlights don't go up, take II
> The plot thickens, but thanks Will for pointing that out - you are dead
> on.
> When I try to lift the headlights by hand, they raise freely the same
> 1/2"
> and then they and totally blocked against something and won't go up any
> further. I don't want to pull too hard and bend something, but I think
> we're
> getting closer - the buckets are jammed and will only raise a little
> bit.
> I'll keep investigating - I wonder what may have happened?
> -----Original Message-----
> From: DeTomaso [mailto:detomaso-bounces at poca.com] On Behalf Of Will
> Kooiman
> Sent: domingo, 31 de agosto de 2014 19:27
> To: John Buckman; detomaso at poca.com
> Subject: Re: [DeTomaso] Headlights don't go up, take II
> I would also check that the headlights raise by hand without
> obstructions.
> With the motor assembly removed, you should be able to lift them by
> hand.
> The only resistance should be gravity.
> I^1m sure you^1ll find it, though. If it is skipping, it shouldn^1t be
> too
> hard to find the source.
>> On 8/31/14, 1:15 PM, "John Buckman" <jb841 at cox.net> wrote:
>> Charlie,
>>
>> What about the coupling that connects the motor shaft to the gear
>> housing? It could be slipping.
>>
>> John
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> DeTomaso mailing list
>> DeTomaso at poca.com
>> http://poca.com/mailman/listinfo/detomaso_poca.com
> _______________________________________________
> Detomaso Forum Managed by POCA
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
> _______________________________________________
> Detomaso Forum Managed by POCA
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
>
> !DSPAM:54041cce215302457613276!
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
>
> !DSPAM:54041cce215302457613276!
More information about the DeTomaso
mailing list