[DeTomaso] Hydraulic Throw-out Bearing

[Ken Green]

McLeod has made then for years and has one for a Pantera.

Ken
 

________________________________
 From: Scott Bell <scott at saccrestorations.net>
To: 'Corey Price' <coreyjprice at gmail.com> 
Cc: detomaso at poca.com 
Sent: Sunday, November 2, 2014 7:47 PM
Subject: Re: [DeTomaso] Hydraulic Throw-out Bearing
  

There are versions out there in the aftermarket that don't require ANY adjustment. 

Maybe the first units were problematic but it seems that stuff like this usually gets better over time.

Does anyone know of someone that is running one?

-----Original Message-----
From: Corey Price [mailto:coreyjprice at gmail.com] 
Sent: Sunday, November 02, 2014 7:45 PM
To: Scott Bell
Cc: Larry Finch
Subject: Re: [DeTomaso] Hydraulic Throw-out Bearing

Scott,

I seem to remember hearing a few horror stories about them, related to the way they require adjustment and longevity in the
aftermarket versions. 

Corey

> On Nov 2, 2014, at 8:40 PM, "Scott Bell" <scott at saccrestorations.net> wrote:
> 
>   Yes, I am aware of this...
> 
> 
>   Come to think about it, when the stock throw-out bearing fails, you
>   still have to pull out the ZF... J
> 
> 
>   What they offer is a longer throw which is what I am in need of...
> 
> 
> 
>   From: Pantdino [mailto:pantdino at aol.com]
>   Sent: Sunday, November 02, 2014 7:35 PM
>   To: scott at saccrestorations.net; detomaso at poca.com
>   Subject: Re: [DeTomaso] Hydraulic Throw-out Bearing
> 
> 
>   You do know that if / when the bearing fails you have to pull the ZF,
>   right?
> 
> 
>   I'm curious as to what they have to offer that offsets that risk.
> 
> 
> 
> 
> 
>   -----Original Message-----
>   From: Scott Bell <[1]scott at saccrestorations.net>
>   To: detomaso <[2]detomaso at poca.com>
>   Sent: Sun, Nov 2, 2014 7:00 pm
>   Subject: [DeTomaso] Hydraulic Throw-out Bearing
> 
>   Does anyone have any experience with a hydraulic throw-out bearing for
>   the ZF? Any recommendations on a unit that works well with the ZF? I
>   was looking at a Tilton 6000 series unit but I am not sure if it will
>   work easily with the ZF?
> 
> 
>   Thanks, Scott
> 
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> DeTomaso mailing list
> [3]DeTomaso at poca.com
> [4]http://poca.com/mailman/listinfo/detomaso_poca.com
> 
> References
> 
>   1. mailto:scott at saccrestorations.net
>   2. mailto:detomaso at poca.com
>   3. mailto:DeTomaso at poca.com
>   4. http://poca.com/mailman/listinfo/detomaso_poca.com
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com


_______________________________________________

Detomaso Forum Managed by POCA

DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
-------------- next part --------------
   McLeod has made then for years and has one for a Pantera.
   Ken
   From: Scott Bell <scott at saccrestorations.net>
   To: 'Corey Price' <coreyjprice at gmail.com>
   Cc: detomaso at poca.com
   Sent: Sunday, November 2, 2014 7:47 PM
   Subject: Re: [DeTomaso] Hydraulic Throw-out Bearing
   There are versions out there in the aftermarket that don't require ANY
   adjustment.
   Maybe the first units were problematic but it seems that stuff like
   this usually gets better over time.
   Does anyone know of someone that is running one?
   -----Original Message-----
   From: Corey Price [mailto:[1]coreyjprice at gmail.com]
   Sent: Sunday, November 02, 2014 7:45 PM
   To: Scott Bell
   Cc: Larry Finch
   Subject: Re: [DeTomaso] Hydraulic Throw-out Bearing
   Scott,
   I seem to remember hearing a few horror stories about them, related to
   the way they require adjustment and longevity in the
   aftermarket versions.
   Corey
   > On Nov 2, 2014, at 8:40 PM, "Scott Bell"
   <[2]scott at saccrestorations.net> wrote:
   >
   >  Yes, I am aware of this...
   >
   >
   >  Come to think about it, when the stock throw-out bearing fails, you
   >  still have to pull out the ZF... J
   >
   >
   >  What they offer is a longer throw which is what I am in need of...
   >
   >
   >
   >  From: Pantdino [mailto:[3]pantdino at aol.com]
   >  Sent: Sunday, November 02, 2014 7:35 PM
   >  To: [4]scott at saccrestorations.net; [5]detomaso at poca.com
   >  Subject: Re: [DeTomaso] Hydraulic Throw-out Bearing
   >
   >
   >  You do know that if / when the bearing fails you have to pull the
   ZF,
   >  right?
   >
   >
   >  I'm curious as to what they have to offer that offsets that risk.
   >
   >
   >
   >
   >
   >  -----Original Message-----
   >  From: Scott Bell <[1][6]scott at saccrestorations.net>
   >  To: detomaso <[2][7]detomaso at poca.com>
   >  Sent: Sun, Nov 2, 2014 7:00 pm
   >  Subject: [DeTomaso] Hydraulic Throw-out Bearing
   >
   >  Does anyone have any experience with a hydraulic throw-out bearing
   for
   >  the ZF? Any recommendations on a unit that works well with the ZF? I
   >  was looking at a Tilton 6000 series unit but I am not sure if it
   will
   >  work easily with the ZF?
   >
   >
   >  Thanks, Scott
   >
   > _______________________________________________
   >
   > Detomaso Forum Managed by POCA
   >
   > DeTomaso mailing list
   > [3][8]DeTomaso at poca.com
   > [4][9]http://poca.com/mailman/listinfo/detomaso_poca.com
   >
   > References
   >
   >  1. mailto:[10]scott at saccrestorations.net
   >  2. mailto:[11]detomaso at poca.com
   >  3. mailto:[12]DeTomaso at poca.com
   >  4. [13]http://poca.com/mailman/listinfo/detomaso_poca.com
   > _______________________________________________
   >
   > Detomaso Forum Managed by POCA
   >
   > DeTomaso mailing list
   > [14]DeTomaso at poca.com
   > [15]http://poca.com/mailman/listinfo/detomaso_poca.com
   _______________________________________________
   Detomaso Forum Managed by POCA
   DeTomaso mailing list
   [16]DeTomaso at poca.com
   [17]http://poca.com/mailman/listinfo/detomaso_poca.com

References

   1. mailto:coreyjprice at gmail.com
   2. mailto:scott at saccrestorations.net
   3. mailto:pantdino at aol.com
   4. mailto:scott at saccrestorations.net
   5. mailto:detomaso at poca.com
   6. mailto:scott at saccrestorations.net
   7. mailto:detomaso at poca.com
   8. mailto:DeTomaso at poca.com
   9. http://poca.com/mailman/listinfo/detomaso_poca.com
  10. mailto:scott at saccrestorations.net
  11. mailto:detomaso at poca.com
  12. mailto:DeTomaso at poca.com
  13. http://poca.com/mailman/listinfo/detomaso_poca.com
  14. mailto:DeTomaso at poca.com
  15. http://poca.com/mailman/listinfo/detomaso_poca.com
  16. mailto:DeTomaso at poca.com
  17. http://poca.com/mailman/listinfo/detomaso_poca.com