[DeTomaso] Hydraulic Throw-out Bearing

[Scott Bell]

Yes, I am aware of this. 
 
Come to think about it, when the stock throw-out bearing fails, you still have to pull out the ZF. J
 
What they offer is a longer throw which is what I am in need of.
 
 
From: Pantdino [mailto:pantdino at aol.com] 
Sent: Sunday, November 02, 2014 7:35 PM
To: scott at saccrestorations.net; detomaso at poca.com
Subject: Re: [DeTomaso] Hydraulic Throw-out Bearing
 
You do know that if / when the bearing fails you have to pull the ZF, right?
 
I'm curious as to what they have to offer that offsets that risk.
 
 
 
 
-----Original Message-----
From: Scott Bell <scott at saccrestorations.net>
To: detomaso <detomaso at poca.com>
Sent: Sun, Nov 2, 2014 7:00 pm
Subject: [DeTomaso] Hydraulic Throw-out Bearing
 
   Does anyone have any experience with a hydraulic throw-out bearing for
   the ZF? Any recommendations on a unit that works well with the ZF? I
   was looking at a Tilton 6000 series unit but I am not sure if it will
   work easily with the ZF?
 
 
   Thanks, Scott
_______________________________________________
 
Detomaso Forum Managed by POCA
 
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
-------------- next part --------------
   Yes, I am aware of this...


   Come to think about it, when the stock throw-out bearing fails, you
   still have to pull out the ZF... J


   What they offer is a longer throw which is what I am in need of...



   From: Pantdino [mailto:pantdino at aol.com]
   Sent: Sunday, November 02, 2014 7:35 PM
   To: scott at saccrestorations.net; detomaso at poca.com
   Subject: Re: [DeTomaso] Hydraulic Throw-out Bearing


   You do know that if / when the bearing fails you have to pull the ZF,
   right?


   I'm curious as to what they have to offer that offsets that risk.





   -----Original Message-----
   From: Scott Bell <[1]scott at saccrestorations.net>
   To: detomaso <[2]detomaso at poca.com>
   Sent: Sun, Nov 2, 2014 7:00 pm
   Subject: [DeTomaso] Hydraulic Throw-out Bearing

   Does anyone have any experience with a hydraulic throw-out bearing for
   the ZF? Any recommendations on a unit that works well with the ZF? I
   was looking at a Tilton 6000 series unit but I am not sure if it will
   work easily with the ZF?


   Thanks, Scott

_______________________________________________

Detomaso Forum Managed by POCA

DeTomaso mailing list
[3]DeTomaso at poca.com
[4]http://poca.com/mailman/listinfo/detomaso_poca.com

References

   1. mailto:scott at saccrestorations.net
   2. mailto:detomaso at poca.com
   3. mailto:DeTomaso at poca.com
   4. http://poca.com/mailman/listinfo/detomaso_poca.com