[DeTomaso] My break lights are not coming on. What procedures should I go through to determine the problem.
MikeLDrew at aol.com
MikeLDrew at aol.com
Mon May 12 23:02:19 EDT 2014
In a message dated 5/12/14 13 26 12, michael at michaelshortt.com writes:
> Check the fuse
> Check the lamps/bulbs
> Check all the grounds
> R & R the brake light switch
>
>
>>>And before any of that, with the key on, unplug the wires from the
switch and using a piece of wire or a paper clip, connect them together--if the
system is otherwise working the lights will come on. That tells you the
problem is in the switch.
Don't touch the paper clip to anything metal while it is connected, or it
will blow the fuse.
Mike
-------------- next part --------------
In a message dated 5/12/14 13 26 12, michael at michaelshortt.com writes:
Check the fuse
Check the lamps/bulbs
Check all the grounds
R & R the brake light switch
>>>And before any of that, with the key on, unplug the wires from the
switch and using a piece of wire or a paper clip, connect them
together--if the system is otherwise working the lights will come on.
That tells you the problem is in the switch.
Don't touch the paper clip to anything metal while it is connected, or
it will blow the fuse.
Mike
More information about the DeTomaso
mailing list