[DeTomaso] Fw: Re: Need Help gerbox

[The DeTomaso Registry Guy]

Could there be something like a bolt, or other debris within the
bell-housing space?

(Like something dropped thru the inspection hole)

Chuck
I have one of those bore-scopes, which records onto a typical camera card.
Perfect for this check, yet I'm on the other side of the world, so not
practical.

-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at poca.com] On Behalf Of Freddy
Henningsen
Sent: Sunday, May 04, 2014 12:36 PM
To: John Buckman; detomaso at poca.com
Subject: Re: [DeTomaso] Fw: Re: Need Help gerbox

John. good eyes you have :) but it is the image that lie. what you see is an

original edge. But take a look at this picture. disregard marks around the 
bolt. see the top edge. what could it be that touches the paint?

Freddy



----- Original Message ----- 
From: "John Buckman" <jb841 at cox.net>
To: <detomaso at poca.com>
Sent: Sunday, May 04, 2014 8:26 PM
Subject: Re: [DeTomaso] Fw: Re: Need Help gerbox


Freddy,

There appear to be some marks on your old pressure plate, as indicated by 
the arrows on the attached pic.

Centerforce usually has a spacer behind the throwout bearing.  If the spacer

isn't used, it might be possible for the throwout fork to contact the 
pressure plate.

In your video, it sounds like the engine slows down when the clutch pedal is

depressed.

John




----------------------------------------------------------------------------
----


> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>