[DeTomaso] NorCal Alignment work
Brent Stewart
bjbstewart at yahoo.com
Tue Mar 18 15:51:58 EDT 2014
Also, I installed the IPSCO Camber lock kit before I went up there. He REALLY liked that, he said it made it much easier to dial in the correct camber. It was easy to install, took me about an hour to get it all in. Highly recommended!
http://www.ipsco.org/Pantera%20Parts/Frontcamberlock.htm
On Tuesday, March 18, 2014 11:34 AM, Kirby Schrader <kirby.schrader at gmail.com> wrote:
Roger Kraus Racing is where Tom Upton and myself buy our Avon slicks for the Panteras.
I've talked to Roger several times and he and his staff are always cordial, helpful and knowledgeable.
Highly recommended from me, too!
Never been there though... too far to drive for a set of tires...
:-)
Kirby
On Tue, Mar 18, 2014 at 12:59 PM, Brent Stewart <bjbstewart at yahoo.com> wrote:
All,
> Just a quick shout out to Roger Kraus Racing in Hayward, CA. Based on
> feedback from another Pantera owner, I went there despite the 1hr trip
> from San Jose. The tech knew exactly what he was doing and did the
> 4-wheel alignment to me what feels perfectly. I'm very happy with the
> ride now - made a huge difference. If you are in NorCal and need that
> type of work done, it's worth the trip.
> In talking with Roger a bit, he mentioned that he was one of the
> originators of the Pantera chassis stiffening kits, and manufactured
> quite a few back in the day. He then sold that product to someone
> (Larry Stock?).
> Note the picture of Roger and the Pantera poster hanging on the wall
> behind him!
>
>_______________________________________________
>
>Detomaso Forum Managed by POCA
>
>DeTomaso mailing list
>DeTomaso at poca.com
>http://poca.com/mailman/listinfo/detomaso_poca.com
>
>
-------------- next part --------------
Also, I installed the IPSCO Camber lock kit before I went up there. He
REALLY liked that, he said it made it much easier to dial in the
correct camber. It was easy to install, took me about an hour to get
it all in. Highly recommended!
http://www.ipsco.org/Pantera%20Parts/Frontcamberlock.htm
On Tuesday, March 18, 2014 11:34 AM, Kirby Schrader
<kirby.schrader at gmail.com> wrote:
Roger Kraus Racing is where Tom Upton and myself buy our Avon slicks
for the Panteras.
I've talked to Roger several times and he and his staff are always
cordial, helpful and knowledgeable.
Highly recommended from me, too!
Never been there though... too far to drive for a set of tires...
:-)
Kirby
On Tue, Mar 18, 2014 at 12:59 PM, Brent Stewart
<[1]bjbstewart at yahoo.com> wrote:
All,
Just a quick shout out to Roger Kraus Racing in Hayward, CA.
Based on
feedback from another Pantera owner, I went there despite the 1hr
trip
from San Jose. The tech knew exactly what he was doing and did
the
4-wheel alignment to me what feels perfectly. I'm very happy
with the
ride now - made a huge difference. If you are in NorCal and need
that
type of work done, it's worth the trip.
In talking with Roger a bit, he mentioned that he was one of the
originators of the Pantera chassis stiffening kits, and
manufactured
quite a few back in the day. He then sold that product to
someone
(Larry Stock?).
Note the picture of Roger and the Pantera poster hanging on the
wall
behind him!
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
[2]DeTomaso at poca.com
[3]http://poca.com/mailman/listinfo/detomaso_poca.com
References
1. mailto:bjbstewart at yahoo.com
2. mailto:DeTomaso at poca.com
3. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list