[DeTomaso] Seat belt receptacle
Christopher Kimball
chrisvkimball at msn.com
Sun Mar 2 20:42:44 EST 2014
Again, the problem is I only want the female part--not the retractor, etc.
Date: Sun, 2 Mar 2014 20:25:58 -0500
Subject: Re: [DeTomaso] Seat belt receptacle
From: bd8134 at gmail.com
To: mbefthomas at comcast.net
CC: chrisvkimball at msn.com; detomaso at poca.com
I used the seat belts form this company with the blade rather than the 12" cable which would be too long.http://www.seatbeltsplus.com/product/WSCH14134C-6.html
At the time they did not offer any different lengths of webbing, but the manufacturer did alter them for me for free.I used their 90 degree bracket for the buckle end, the retracter end was the thinnest one I could find and clears the seats.
On Sun, Mar 2, 2014 at 2:52 PM, Mike Thomas <mbefthomas at comcast.net> wrote:
Chris, SOBill Taylor sent me this link when I was asking about belts a while
ago. The receptacle ends look to be on a stiff stalk.
Mike
http://coolfj40.stores.yahoo.net/seatbelfj19t.html
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at poca.com] On Behalf Of Christopher
Kimball
Sent: Saturday, March 01, 2014 12:41 PM
To: 'Pantera list serve'
Subject: [DeTomaso] Seat belt recepticals
Hi folks,
While my seats will be out of the car getting reupholstered, I'd like to
replace the female sides of the seat belts with the kind mounted on stiff
stalks so I don't have to dig around trying to find them every time I drive.
I think in a past post someone said a Ford pickup part would work with the
stock male belts I'm going to retain.
Does anyone know the part I need?
Thanks,
Chris
Sent from my Windows Phone
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
-------------- next part --------------
Again, the problem is I only want the female part--not the retractor,
etc.
__________________________________________________________________
Date: Sun, 2 Mar 2014 20:25:58 -0500
Subject: Re: [DeTomaso] Seat belt receptacle
From: bd8134 at gmail.com
To: mbefthomas at comcast.net
CC: chrisvkimball at msn.com; detomaso at poca.com
I used the seat belts form this company with the blade rather than the
12" cable which would be too long.
[1]http://www.seatbeltsplus.com/product/WSCH14134C-6.html
At the time they did not offer any different lengths of webbing, but
the manufacturer did alter them for me for free.
I used their 90 degree bracket for the buckle end, the retracter end
was the thinnest one I could find and clears the seats.
On Sun, Mar 2, 2014 at 2:52 PM, Mike Thomas <[2]mbefthomas at comcast.net>
wrote:
Chris, SOBill Taylor sent me this link when I was asking about belts
a while
ago. The receptacle ends look to be on a stiff stalk.
Mike
[3]http://coolfj40.stores.yahoo.net/seatbelfj19t.html
-----Original Message-----
From: DeTomaso [mailto:[4]detomaso-bounces at poca.com] On Behalf Of
Christopher
Kimball
Sent: Saturday, March 01, 2014 12:41 PM
To: 'Pantera list serve'
Subject: [DeTomaso] Seat belt recepticals
Hi folks,
While my seats will be out of the car getting reupholstered, I'd
like to
replace the female sides of the seat belts with the kind mounted on
stiff
stalks so I don't have to dig around trying to find them every time
I drive.
I think in a past post someone said a Ford pickup part would work
with the
stock male belts I'm going to retain.
Does anyone know the part I need?
Thanks,
Chris
Sent from my Windows Phone
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
[5]DeTomaso at poca.com
[6]http://poca.com/mailman/listinfo/detomaso_poca.com
References
1. http://www.seatbeltsplus.com/product/WSCH14134C-6.html
2. mailto:mbefthomas at comcast.net
3. http://coolfj40.stores.yahoo.net/seatbelfj19t.html
4. mailto:detomaso-bounces at poca.com
5. mailto:DeTomaso at poca.com
6. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list