[DeTomaso] Clutch Master Access Hole - Recommendations?
Ken Green
kenn_green at yahoo.com
Tue Jul 22 18:22:17 EDT 2014
I thought the hole was to make it easier to remove the clutch MC.
Ken
________________________________
From: bill gaino <gaino at earthlink.net>
To: Brent Stewart <bjbstewart at yahoo.com>; Pantera List <detomaso at poca.com>
Sent: Tuesday, July 22, 2014 3:06 PM
Subject: Re: [DeTomaso] Clutch Master Access Hole - Recommendations?
Brent, I have never seen that modification. I think the only adjustment would be the length of the rod that pushes the cylider in, and I would just remove the MC and do it there. Was it working before? Did something change? Are you having a problem? Bill 1362
https://www.facebook.com/pages/slickpaintcom/129049637149634?ref=ts&fref=ts
If you want it slick. www.slickpaint.com like us on facebook
-----Original Message-----
>From: Brent Stewart via DeTomaso <detomaso at poca.com>
>Sent: Jul 22, 2014 5:37 PM
>To: Pantera List <detomaso at poca.com>
>Subject: [DeTomaso] Clutch Master Access Hole - Recommendations?
>
> I need to do an adjustment to my clutch master, and am going to bite
> the bullet and cut the access hole in the side. I've seen one where 3
> sides of the access hole are cut, then bent out of the way for
> adjustments, then bent back when done. I've seen one where all 4 sides
> are cut and the metal removed and just the carpet covers the open
> hole.
> What I'd like to ask is, what other options are there? This is a
> pretty creative group, and I'm sure someone has made a very cool
> modification for this. riveted on a hinge and put a latch? Maybe
> added an actuator and put it on the garage door remote?
> Seriously, what are some good ideas to make this as clean of an access
> hole as possible? I was thinking maybe to cut all 4 sides, then use a
> piece of sheet magnet to cover (under the carpet of course).
> appreciate any ideas you have!
> brent
> 4328
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
-------------- next part --------------
I thought the hole was to make it easier to remove the clutch MC.
Ken
From: bill gaino <gaino at earthlink.net>
To: Brent Stewart <bjbstewart at yahoo.com>; Pantera List
<detomaso at poca.com>
Sent: Tuesday, July 22, 2014 3:06 PM
Subject: Re: [DeTomaso] Clutch Master Access Hole - Recommendations?
Brent, I have never seen that modification. I think the only adjustment
would be the length of the rod that pushes the cylider in, and I would
just remove the MC and do it there. Was it working before? Did
something change? Are you having a problem? Bill 1362
[1]https://www.facebook.com/pages/slickpaintcom/129049637149634?ref=ts&
fref=ts
If you want it slick. www.slickpaint.com like us on facebook
-----Original Message-----
>From: Brent Stewart via DeTomaso <[2]detomaso at poca.com>
>Sent: Jul 22, 2014 5:37 PM
>To: Pantera List <[3]detomaso at poca.com>
>Subject: [DeTomaso] Clutch Master Access Hole - Recommendations?
>
> I need to do an adjustment to my clutch master, and am going to bite
> the bullet and cut the access hole in the side. I've seen one where
3
> sides of the access hole are cut, then bent out of the way for
> adjustments, then bent back when done. I've seen one where all 4
sides
> are cut and the metal removed and just the carpet covers the open
> hole.
> What I'd like to ask is, what other options are there? This is a
> pretty creative group, and I'm sure someone has made a very cool
> modification for this. riveted on a hinge and put a latch? Maybe
> added an actuator and put it on the garage door remote?
> Seriously, what are some good ideas to make this as clean of an
access
> hole as possible? I was thinking maybe to cut all 4 sides, then use
a
> piece of sheet magnet to cover (under the carpet of course).
> appreciate any ideas you have!
> brent
> 4328
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
[4]DeTomaso at poca.com
[5]http://poca.com/mailman/listinfo/detomaso_poca.com
References
1. https://www.facebook.com/pages/slickpaintcom/129049637149634?ref=ts&fref=ts
2. mailto:detomaso at poca.com
3. mailto:detomaso at poca.com
4. mailto:DeTomaso at poca.com
5. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list