[DeTomaso] Front Fender construction

[Chance Dorsey]

When I stripped my fenders I found the exact same line.  I just assumed it was left from the die that stamped it.

Thanks,

Chance Dorsey
Austin, TX

> On Jan 25, 2014, at 12:45 PM, "doug351c" <doug351c at gmail.com> wrote:
> 
> We stripped the other fender yesterday and found the same weld so I tend to agree with your opinion; what's your opinion based on?
>  
> Doug Braun
> blue 73L #5505
> -----Original Message-----
> From: DeTomaso [mailto:detomaso-bounces at poca.com]On Behalf Of R.J.
> Sent: Friday, January 24, 2014 1:14 PM
> To: detomaso at poca.com
> Subject: Re: [DeTomaso] Front Fender construction
> 
> Yes, they all where made that way, maybe except early prototypes.
> 
> Am 24.01.2014 22:08, schrieb doug351c:
>> Hi Guys,
>> 
>> I'm in the middle of a restoration on my Pantera and ran across what appears
>> to be a machine-tig-welded seam that runs the length of the front fender
>> about an inch down from the top-outer crease.  My question is - were all
>> factory Pantera front fenders made in two pieces this way?
>> 
>> Doug Braun
>> blue 73L #5505
>>  
> 
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20140125/15fc495d/attachment.html>