[DeTomaso] Hall Ultra Wheels
Paul Timko
thedrol at pobox.com
Mon Feb 10 17:58:15 EST 2014
"My wheels were not tracked" means the car was never driven hard on a
track with these wheels on it.
Paul
#9270
On 2/10/2014 4:50 PM, Peter Cajthaml wrote:
> I checked the wheels yesterday: no missing bolts, no visible cracks from
> the outside. The tire pressure is okay. I drove the car around town,
> keeping the speed under 60. Is there a way to check for cracks without
> removing the tires; i.e. is there any value to inspecting the rims from
> the inside? (I am in socal / ventura county: does anyone know of a shop
> with the expertise to evaluate the wheels?)
>
> Dave; what do you mean by "my wheels were not tracked"?
>
>
> On Sun, Feb 9, 2014 at 6:16 PM, Dave <dave at damardirect.com
> <mailto:dave at damardirect.com>> wrote:
>
> It's worth mentioning that when Hall was selling these wheels, he
> did so in a very earnest and sincere manner--that is, he didn't
> deliberately go out and produce wheels that would fail____
>
> __ __
>
> __Ø__I agree completely. No one should drive a car with these
> wheels. My wheels were not tracked. 3 0f 4 wheels had cracks.____
>
> IndyDave____
>
> __ __
>
> __ __
>
> *From:*MikeLDrew at aol.com <mailto:MikeLDrew at aol.com>
> [mailto:MikeLDrew at aol.com <mailto:MikeLDrew at aol.com>]
> *Sent:* Sunday, February 09, 2014 4:34 PM
> *To:* Dave; pcajthaml at gmail.com <mailto:pcajthaml at gmail.com>;
> jderyke at aol.com <mailto:jderyke at aol.com>
>
>
> *Cc:* detomaso at poca.com <mailto:detomaso at poca.com>
> *Subject:* Re: [DeTomaso] Hall Ultra Wheels____
>
> __ __
>
>
> In a message dated 2/8/14 14 15 30, dave at damardirect.com
> <mailto:dave at damardirect.com> writes:
>
>
>
> ____
>
> I don’t recall the name of my Hall wheels, picture of front & rear
> wheel below.____
>
>
>
> >>>Notice that these, too, consist of centers originally designed for 15-inch wheels, mated to hoops to accept 17-inch tires. Besides the fact that they always looked a little weird, I always wondered about how that kluge would work from a structural basis? I haven't a shred of knowledge to be able to guess just by looking.
>
> It's worth mentioning that when Hall was selling these wheels, he
> did so in a very earnest and sincere manner--that is, he didn't
> deliberately go out and produce wheels that would fail (sometimes
> catastrophically) a few years down the road. He went in good faith
> to a wheel maker, who produced wheels to his design. It is that
> wheelmaker (unknown?) who let the team down; Hall was just stuck in
> between him and angry customers a few years later. Not a pleasant
> position to be in, to be sure!
>
> Mike____
>
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
More information about the DeTomaso
mailing list