[DeTomaso] Aluminium intake manifold treatment

[MikeLDrew at aol.com]

In a message dated 2/8/14 7 10 36, cengles at cox.net writes:


>             If you want a fully polished manifold, then you can buy from 
> a
> normal vendor and polish it yourself (which is very time consuming) or you
> could find someone to polish it for you (which is expensive.  Here the 
> local
> professionals would charge $600 to polish a $400 aluminum intake manifold)
> with excellent results.  If you polish it, then you'll need to consider
> clear coating it, which will last a couple of years I am told.
> 

>>>Don't forget that Edelbrock (and perhaps others?) sell their intakes 
already polished, at only slightly higher cost (certainly less than if you took 
a raw intake and had it polished yourself?)

Mike
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20140209/db82c311/attachment.html>