[DeTomaso] Weber's or IR Stack EFI for high HP applications
Boyd Casey
boyd411 at gmail.com
Fri Dec 12 13:42:20 EST 2014
Ed,
Kelly Coffield makes complete IR efi set ups using IPSCO throttle bodies.
IPSCO Throttle bodies are availible in both 50 mm and 55 mm. I don't know
what the pricing is but I believe Kelly's phone number is 563 508-4037.
Good luck.
Hugh Boyd Casey
On Fri, Dec 12, 2014 at 1:32 PM, David Nunn <dnunn at telus.net> wrote:
>
> Ed,
>
> I bought the throttle bodies as part of a complete intake "kit" so I can't
> tell you what they cost. Just send an e-mail to Mark at IPSCO and ask for
> current prices for the throttle bodies and injector blocks. Just because
> they aren't on IPSCO's web site, doesn't mean they aren't available. As far
> as a manifold is concerned, I have no idea what would fit your heads but
> someone on the forum probably does. As far as I know, the only "Weber"
> manifolds currently available are for either 351C 4V heads or SVO A3 heads;
> both from Hall Pantera.
>
> Sorry I couldn't be more help!
>
> Dave
>
> -----Original Message-----
> From: Ed Mendez [mailto:edducati at mac.com]
> Sent: December 12, 2014 9:57 AM
> To: David Nunn
> Cc: detomaso at poca.com; Daniel C Jones
> Subject: Re: [DeTomaso] Weber's or IR Stack EFI for high HP applications
>
> How much was this setup and can I get a manifold that would work with my
> CHI
> 3V heads? Probably a 2V manifold and then port match?
>
> Thanks, Ed
>
>
> > On Dec 12, 2014, at 09:47, David Nunn <dnunn at telus.net> wrote:
> >
> > Dan,
> >
> > Having the injectors in the optimum location (aimed directly at the
> > intake
> > valve) doesn't necessarily require notching the deckled and cutting
> > the engine screen.
> >
> > I'm using IPSCO's low profile throttle bodies with IPSCO's injector
> > blocks on one of Kelly C.'s manifolds. I also have a 9.5" tall block
> > but with low profile air cleaners, it all fits below the stock,
> unmodified
> decklid . . .
> > barely.
> >
> > Dave
> > <photo (1).jpg>_______________________________________________
> >
> > Detomaso Forum Managed by POCA
> >
> > DeTomaso mailing list
> > DeTomaso at poca.com
> > http://poca.com/mailman/listinfo/detomaso_poca.com
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
>
-------------- next part --------------
Ed,
Kelly Coffield makesA complete IR efi set ups using IPSCO throttle
bodies.A IPSCO Throttle bodies are availible in both 50 mm and 55 mm.
I don't know what the pricing is but I believe Kelly's phone number is
563 508-4037. Good luck.
Hugh Boyd Casey
On Fri, Dec 12, 2014 at 1:32 PM, David Nunn <[1]dnunn at telus.net> wrote:
Ed,
I bought the throttle bodies as part of a complete intake "kit" so I
can't
tell you what they cost. Just send an e-mail to Mark at IPSCO and
ask for
current prices for the throttle bodies and injector blocks. Just
because
they aren't on IPSCO's web site, doesn't mean they aren't available.
As far
as a manifold is concerned, I have no idea what would fit your heads
but
someone on the forum probably does. As far as I know, the only
"Weber"
manifolds currently available are for either 351C 4V heads or SVO A3
heads;
both from Hall Pantera.
Sorry I couldn't be more help!
Dave
-----Original Message-----
From: Ed Mendez [mailto:[2]edducati at mac.com]
Sent: December 12, 2014 9:57 AM
To: David Nunn
Cc: [3]detomaso at poca.com; Daniel C Jones
Subject: Re: [DeTomaso] Weber's or IR Stack EFI for high HP
applications
How much was this setup and can I get a manifold that would work with
my CHI
3V heads? Probably a 2V manifold and then port match?
Thanks, Ed
> On Dec 12, 2014, at 09:47, David Nunn <[4]dnunn at telus.net> wrote:
>
> Dan,
>
> Having the injectors in the optimum location (aimed directly at the
> intake
> valve) doesn't necessarily require notching the deckled and cutting
> the engine screen.
>
> I'm using IPSCO's low profile throttle bodies with IPSCO's injector
> blocks on one of Kelly C.'s manifolds. I also have a 9.5" tall block
> but with low profile air cleaners, it all fits below the stock,
unmodified
decklid . . .
> barely.
>
> Dave
> <photo (1).jpg>_______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> [5]DeTomaso at poca.com
> [6]http://poca.com/mailman/listinfo/detomaso_poca.com
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
[7]DeTomaso at poca.com
[8]http://poca.com/mailman/listinfo/detomaso_poca.com
References
1. mailto:dnunn at telus.net
2. mailto:edducati at mac.com
3. mailto:detomaso at poca.com
4. mailto:dnunn at telus.net
5. mailto:DeTomaso at poca.com
6. http://poca.com/mailman/listinfo/detomaso_poca.com
7. mailto:DeTomaso at poca.com
8. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list