[DeTomaso] Air to engine discussion

[Matt Wells]

A while back I messed around with some yarn and my gopro just to see.
I don't know if this helps figure anything out short of just trying it.
There were some tendencies I saw with the tufts going upwards slightly
but no vacuum really noticed. This video is shot between 0-120mph.
It was a liitle boring so I added tunes and wrote some corny stuff which
makes little sense now.
Might be enlightening and/or entertaining for some.
Matt
3584

https://www.youtube.com/watch?v=3AaYJ3pkvR0



----- Original Message -----
From: "David" <adin at frontier.net>
To: <detomaso at poca.com>
Sent: Sunday, December 07, 2014 8:11 PM
Subject: [DeTomaso] New engine.


> Two comments here about getting air to the engine:>
> I have documented a 50 degree difference in air temps between the
airfilter
> area and the window area.  Something needs to be done.>
> My tuft tests (admittedly at legal speeds)  did NOT show a boundary layer
at
> the quarter window.  Do things change at speed?  (stay tuned!)>
>
> David
-------------- next part --------------
   A while back I messed around with some yarn and my gopro just to see.
   I don't know if this helps figure anything out short of just trying it.
   There were some tendencies I saw with the tufts going upwards
   slightlyA
   but no vacuum really noticed. This video is shot between 0-120mph.
   It was a liitle boring so I added tunes and wrote some corny stuff
   which makes little sense now.
   Might be enlightening and/or entertaining for some.
   Matt
   3584
   [1]https://www.youtube.com/watch?v=3AaYJ3pkvR0
   ----- Original Message -----
   From: "David" <[2]adin at frontier.net>
   To: <[3]detomaso at poca.com>
   Sent: Sunday, December 07, 2014 8:11 PM
   Subject: [DeTomaso] New engine.
   > Two comments here about getting air to the engine:>
   > I have documented a 50 degree difference in air temps between the
   airfilter
   > area and the window area.A  Something needs to be done.>
   > My tuft tests (admittedly at legal speeds)A  did NOT show a boundary
   layer at
   > the quarter window.A  Do things change at speed?A  (stay tuned!)>
   >
   > David

References

   1. https://www.youtube.com/watch?v=3AaYJ3pkvR0
   2. mailto:adin at frontier.net
   3. mailto:detomaso at poca.com