[DeTomaso] Techno Question: Bung placement on headers for A/F sensor
doug351c
doug351c at gmail.com
Sun Aug 17 16:16:57 EDT 2014
Dave,
By "outlet" do you mean header collector flange?
Doug Braun
blue 73L #5505
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at poca.com]On Behalf Of Dave
Londry
Sent: Sunday, August 17, 2014 1:05 PM
To: detomaso at poca.com
Subject: Re: [DeTomaso] Techno Question: Bung placement on headers for
A/F sensor
That is good stuff Chuck and giving all that info first priority,
the farther you are from the outlet - the lower the rpm at which
you'll get stable A/F readings.
The reversions in our short exhaust systems are really fierce.
Below about 1700 rpm I get nothing but crap.
dave
On 17/08/2014 12:03 PM, Charles Engles wrote:
> Dear SOBill, Jerry, Asa and Mike
>
>
>
> Great minds think alike and experience makes the
> optimal location so much easier to pinpoint. Thanks!
>
>
>
> Warmest regards, Chuck Engles
>
>
> From: SOBill at aol.com [mailto:SOBill at aol.com]
> Sent: Sunday, August 17, 2014 12:02 PM
> To: cengles at cox.net; detomaso at poca.com
> Subject: Re: [DeTomaso] Techno Question: Bung placement on headers for
> A/F sensor
>
>
> Chuck,
>
>
> The bung should be mounted at the 12 o'clock position so condensation
> does get to the sensor on startup.
>
>
> I welded mine on the exhaust pipe just after the collector because my
> engine was in the car and I could easily remove the exhaust pipe to do
> the welding.
>
>
> SOBill
>
>
> The main thing is to keep the main thing the main thing.
> Do the best you can with what your have where you are.
> Have fun today!
> SOBill
>
>
> In a message dated 8/17/2014 8:57:41 A.M. Pacific Daylight Time,
> [1]cengles at cox.net writes:
>
> Dear Forum,
> I will soon have both engines out of both
> Panteras for
> work. It dawned on me that this would be a good time to add a bung
> on the
> headers for use with and A/F meter sensor. I have an email sent
> to
> Innovate for their recommendations, but it is the weekend. I
> assume that
> the bung should be welded into the end of the header collector.
> Does anyone have knowledge of the optimal spot
> to put
> the bung?
> Warmest regards, Chuck
> Engles
> Dear Forum,
> I will soon have both engines out of both
> Panteras
> for work. It dawned on me that this would be a good time to add
> a bung
> on the headers for use with and A/F meter sensor. I have an
> email
> sent to Innovate for their recommendations, but it is the
> weekend. I
> assume that the bung should be welded into the end of the header
> collector.
> Does anyone have knowledge of the optimal
> spot to
> put the bung?
> Warmest regards,
> Chuck
> Engles
> _______________________________________________
> Detomaso Forum Managed by POCA
> DeTomaso mailing list
> [2]DeTomaso at poca.com
> [3]http://poca.com/mailman/listinfo/detomaso_poca.com
>
> References
>
> 1. mailto:cengles at cox.net
> 2. mailto:DeTomaso at poca.com
> 3. http://poca.com/mailman/listinfo/detomaso_poca.com
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list