[DeTomaso] Techno Question: Bung placement on headers for A/F sensor
SOBill at aol.com
SOBill at aol.com
Sun Aug 17 13:02:09 EDT 2014
Chuck,
The bung should be mounted at the 12 o'clock position so condensation does
get to the sensor on startup.
I welded mine on the exhaust pipe just after the collector because my
engine was in the car and I could easily remove the exhaust pipe to do the
welding.
SOBill
The main thing is to keep the main thing the main thing.
Do the best you can with what your have where you are.
Have fun today!
SOBill
In a message dated 8/17/2014 8:57:41 A.M. Pacific Daylight Time,
cengles at cox.net writes:
Dear Forum,
I will soon have both engines out of both Panteras for
work. It dawned on me that this would be a good time to add a bung on the
headers for use with and A/F meter sensor. I have an email sent to
Innovate for their recommendations, but it is the weekend. I assume that
the bung should be welded into the end of the header collector.
Does anyone have knowledge of the optimal spot to put
the bung?
Warmest regards, Chuck Engles
Dear Forum,
I will soon have both engines out of both Panteras
for work. It dawned on me that this would be a good time to add a bung
on the headers for use with and A/F meter sensor. I have an email
sent to Innovate for their recommendations, but it is the weekend. I
assume that the bung should be welded into the end of the header
collector.
Does anyone have knowledge of the optimal spot to
put the bung?
Warmest regards, Chuck
Engles
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
-------------- next part --------------
Chuck,
The bung should be mounted at the 12 o'clock position so condensation
does get to the sensor on startup.
I welded mine on the exhaust pipe just after the collector because my
engine was in the car and I could easily remove the exhaust pipe to do
the welding.
SOBill
The main thing is to keep the main thing the main thing.
Do the best you can with what your have where you are.
Have fun today!
SOBill
In a message dated 8/17/2014 8:57:41 A.M. Pacific Daylight Time,
cengles at cox.net writes:
Dear Forum,
I will soon have both engines out of both
Panteras for
work. It dawned on me that this would be a good time to add a bung
on the
headers for use with and A/F meter sensor. I have an email sent
to
Innovate for their recommendations, but it is the weekend. I
assume that
the bung should be welded into the end of the header collector.
Does anyone have knowledge of the optimal spot
to put
the bung?
Warmest regards, Chuck
Engles
Dear Forum,
I will soon have both engines out of both
Panteras
for work. It dawned on me that this would be a good time to add
a bung
on the headers for use with and A/F meter sensor. I have an
email
sent to Innovate for their recommendations, but it is the
weekend. I
assume that the bung should be welded into the end of the header
collector.
Does anyone have knowledge of the optimal
spot to
put the bung?
Warmest regards,
Chuck
Engles
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list