[DeTomaso] Techno Question: Bung placement on headers for A/F sensor

[Mike Drew]

Chuck,  

Anyone with a set of eyeballs and a brain does. Sadly I was lacking in the latter department when I had mine installed in the six o'clock position. Only afterwards did I note that there is a beautiful access hole in the chassis that allows the wiring to easily enter the engine bay straight from the collector. 

Engage both eyeballs and brains and you'll do far better than I did!!! :)

Mike

Sent from my iPhone

On Aug 17, 2014, at 8:57, "Charles Engles" <cengles at cox.net> wrote:

>   Dear Forum,
> 
> 
> 
>                       I will soon have both engines out of both Panteras
>   for work.  It dawned on me that this would be a good time to add a bung
>   on the headers for use with and A/F meter sensor.    I have an email
>   sent to Innovate for their recommendations, but it is the weekend.    I
>   assume that the bung should be welded into the end of the header
>   collector.
> 
> 
>                       Does anyone have knowledge of the optimal spot to
>   put the bung?
> 
> 
> 
>                                                Warmest regards, Chuck
>   Engles
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com