[DeTomaso] Ring bolts (again)
Will Kooiman
will.kooiman at gmail.com
Sun Apr 13 17:58:11 EDT 2014
I agree, but I read Thomas as meaning long style pressure plate vs.
diaphragm.
When I switched to diaphragm on my 428 Mustang, I had to remove the helper
spring. Mustangs have a stiff helper spring under the dash to help with the
clutch pedal pressure. The diaphragm was soft enough that the helper spring
overpowered it and the pedal went to the floor.
I agree that the weights are gimmicky, and I know the history. But they
don't hurt, either. I consider the McLeod and Centerforce equivalents, so I
choose by cost.
--
Will
From: Mike Drew <MikeLDrew at aol.com>
Date: Sunday, April 13, 2014 1:47 PM
To: <thomas at hax.se>, Will Kooiman <will.kooiman at gmail.com>,
<shawkins777 at comcast.net>
Cc: <detomaso at poca.com>
Subject: Re: [DeTomaso] Ring bolts (again)
In a message dated 4/12/14 23 51 36, thomas at hax.se writes:
>
> I may go with that then. I've been very happy with the Centerforce
> clutch, together with the long throw slave cylinder, and I suspect that
> the stock or a McLeod clutch may be stiff with the LT cylinder.
>>>There is no reason to suspect that. McLeod makes a diaghragm-style clutch
that is basically the same as a Centerforce, except without the gimmick weights
(which do nothing BTW...)
Mike
-------------- next part --------------
I agree, but I read Thomas as meaning long style pressure plate vs.
diaphragm.
When I switched to diaphragm on my 428 Mustang, I had to remove the
helper spring. Mustangs have a stiff helper spring under the dash to
help with the clutch pedal pressure. The diaphragm was soft enough
that the helper spring overpowered it and the pedal went to the floor.
I agree that the weights are gimmicky, and I know the history. But
they don't hurt, either. I consider the McLeod and Centerforce
equivalents, so I choose by cost.
--
Will
From: Mike Drew <[1]MikeLDrew at aol.com>
Date: Sunday, April 13, 2014 1:47 PM
To: <[2]thomas at hax.se>, Will Kooiman <[3]will.kooiman at gmail.com>,
<[4]shawkins777 at comcast.net>
Cc: <[5]detomaso at poca.com>
Subject: Re: [DeTomaso] Ring bolts (again)
In a message dated 4/12/14 23 51 36, [6]thomas at hax.se writes:
I may go with that then. I've been very happy with the Centerforce
clutch, together with the long throw slave cylinder, and I suspect
that
the stock or a McLeod clutch may be stiff with the LT cylinder.
>>>There is no reason to suspect that. McLeod makes a diaghragm-style
clutch that is basically the same as a Centerforce, except without the
gimmick weights (which do nothing BTW...)
Mike
References
1. mailto:MikeLDrew at aol.com
2. mailto:thomas at hax.se
3. mailto:will.kooiman at gmail.com
4. mailto:shawkins777 at comcast.net
5. mailto:detomaso at poca.com
6. mailto:thomas at hax.se
More information about the DeTomaso
mailing list