[DeTomaso] Taking Ashtray Apart
Mike Thomas
mbefthomas at comcast.net
Sat Apr 5 15:36:26 EDT 2014
Except that it would probably track the chrome finish on the frame, or is
that what the zinc dip would do?
From: Al Gisby [mailto:algisby at hotmail.com]
Sent: Saturday, April 05, 2014 12:21 PM
To: Mike Thomas; detomaso at poca.com
Subject: RE: [DeTomaso] Taking Ashtray Apart
...why not just blast and zinc dip the lot without disassembly and keeps the
mechanism working as it should. Then refinish outer lid.
Thats what I was considering.
Ciao for now
Al
#1925
> From: mbefthomas at comcast.net <mailto:mbefthomas at comcast.net>
> To: detomaso at poca.com <mailto:detomaso at poca.com>
> Date: Sat, 5 Apr 2014 11:48:48 -0700
> Subject: [DeTomaso] Taking Ashtray Apart
>
> Wanted to take the ashtray apart so I can refinish the inside and paint
the
> lid. Does not come apart, seems to be secured with a couple of rivets on
> either side. Drilling our should be fairly straightforward, but is there a
> particular type of rivet needed to put it back together?
>
> Thanks!
> Mike Thomas
> VP, POCA
> VP, Panteras Northwest
> Yellow '74 #6328
>
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com <mailto:DeTomaso at poca.com>
> http://poca.com/mailman/listinfo/detomaso_poca.com
-------------- next part --------------
Except that it would probably track the chrome finish on the frame, or
is that what the zinc dip would do?
From: Al Gisby [mailto:algisby at hotmail.com]
Sent: Saturday, April 05, 2014 12:21 PM
To: Mike Thomas; detomaso at poca.com
Subject: RE: [DeTomaso] Taking Ashtray Apart
...why not just blast and zinc dip the lot without disassembly and
keeps the mechanism working as it should. Then refinish outer lid.
Thats what I was considering.
Ciao for now
Al
#1925
> From: [1]mbefthomas at comcast.net
> To: [2]detomaso at poca.com
> Date: Sat, 5 Apr 2014 11:48:48 -0700
> Subject: [DeTomaso] Taking Ashtray Apart
>
> Wanted to take the ashtray apart so I can refinish the inside and
paint the
> lid. Does not come apart, seems to be secured with a couple of rivets
on
> either side. Drilling our should be fairly straightforward, but is
there a
> particular type of rivet needed to put it back together?
>
> Thanks!
> Mike Thomas
> VP, POCA
> VP, Panteras Northwest
> Yellow '74 #6328
>
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> [3]DeTomaso at poca.com
> [4]http://poca.com/mailman/listinfo/detomaso_poca.com
References
1. mailto:mbefthomas at comcast.net
2. mailto:detomaso at poca.com
3. mailto:DeTomaso at poca.com
4. http://poca.com/mailman/listinfo/detomaso_poca.com
More information about the DeTomaso
mailing list