[DeTomaso] Clutch Master Cylinders and Engine Mounts
MikeLDrew at aol.com
MikeLDrew at aol.com
Wed Oct 23 01:52:15 EDT 2013
In a message dated 10/22/13 21 44 14, MikeLDrew at aol.com writes:
>
> >>>I believe the early cars came with 21mm master cylinders, and the GT5-S
> was 23mm.
>
>>>Disregard all that. I was getting my sizes mixed up between clutch and
BRAKE master cylinders. The numbers above are for the brake master
cylinders.
I think the clutch master is almost exactly what you need it to be.
Rather than baffle you with another dimly remembered BS answer, I went into one
of my spare parts rooms and waded into a box of old, junk parts that are kept
strictly as conversation pieces. I got an old factory clutch master
cylinder and took it apart and got after it with the dial calipers.
The piston measures .7455 inches or thereabouts, close enough to .75 inches
to safely call it 3/4 inch. :>)
Mike
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20131023/9465e197/attachment.html>
More information about the DeTomaso
mailing list