[DeTomaso] Reverse switch issues

[L GRAY]

Corey, 
    I have a spare ZF cover with threads that I will trade you. I don't need back up switches in my race cars!  :-))
  Send me your cover, I'll switch the ID tags and return a cover with threads and your ID tag attached. (No funds required)

Leslie A. Gray

> On Oct 15, 2013, at 8:23 PM, "Corey Price" <coreyjprice at gmail.com> wrote:
> 
> I recently bought a reverse switch for my ZF.  The ZF shift housing has a hole for the reverse switch to fit into, but it isn't threaded.  The reverse switch has a threaded neck with one nut.  I was told to find a thin M10 nut that can go on the inside and outside, but I have only 0.13" to work with between the inside of the housing and the shifter shaft.  
> 
> Suggestions?  Steve Wilkinson suggested either a thin nut or welding up the hole re-drilling and tapping the new smaller hole for the M10 fine threads.  I have a hunch that finding a thin enough nut is going to be a challenge.  I've also considered filling with a metal-bearing epoxy and threading that.
> 
> Corey
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso_poca.com