[DeTomaso] E-brake cables
MikeLDrew at aol.com
MikeLDrew at aol.com
Tue Oct 15 14:20:31 EDT 2013
In a message dated 10/15/13 8 49 21, steve at snclocks.com writes:
> Do the emergency brake cables rub on the bottom of the pan if the engine
> mounts are new?
>
>>>They rub all the time, particularly if a larger aftermarket pan is
fitted. There are folded steel clips on the chassis that hold the cables up off
the ground; by design of the cable routing, they necessarily rest against
the bottom of the pan.
>
> >I have decided to pull the engine on 5332 and remove the current cam so I
> can get back to a smoother idle and deceleration. And to fix whatever is
> making the engine smoke on one side - likely the result of putting in a
> high-lift cam with no attention to the heads. Will know for sure in a
> week
> or so when the engine is in lots of little pieces.
>
>>>Sounds like fun!
>
> >I assume that since the trans is out I should replace the front and
> half-shaft seals - are these standard oil seals or something special that
> has to be gotten from a special vendor. If so, any recommendations?
>
>>>I wouldn't touch the seals unless they were leaking? There are various
suppliers for the seals--pick your favorite Pantera vendor, or Lloyd
Butfoy....
Mike
More information about the DeTomaso
mailing list