[DeTomaso] ZF side mounts

[MikeLDrew at aol.com]

In a message dated 11/7/13 16 58 17, julian_kift at hotmail.com writes:


> I would expect vendors like RBT and Dennis Quella to have them sat on the 
> shelf as take offs from ZF GT40 conversions where they are not required as 
> the ZF is hung from the top plate.
> 

>>>Yes, original ZF side mounts are starting to collect on the ground like 
fall leaves!

If the vendors can't help, I can put out a query on the GT40 forum; 
hundreds of Pantera ZF gearboxes have found their way into GT40 replicas and every 
one of them shed its side mounts in the process.

As an alternative plan, have you considered the steel mounts offered by 
Hall and Byars?   This is what we put in Lori's car.   Although the bit that 
attaches to the transaxle is made of steel instead of aluminum, I believe it 
has the same architecture as the originals, making them interchangeable.   If 
you didn't want to fit used originals,   you could just buy the steel kit 
and use the top half of it, and save yourself the considerable trouble and 
expense of attempting to cast new ones on your own.   You might even be able 
to knock a few bucks off if you had them leave the unnecessary bits behind.

Here's a link...

http://hallpantera.com/cgi-bin/p/awtp-product.cgi?d=hallpantera-inc&
item=22099

Mike
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20131107/8a6ba71d/attachment.html>