[DeTomaso] removing rear sway bar
JDeRyke at aol.com
JDeRyke at aol.com
Tue Nov 5 14:58:21 EST 2013
Undo the center nuts first- and be careful- the studs are not strong and
many have been snapped off by careless owners. You'll probably see the bar
move outboard slightly. Then jack up one wheel (doesn't matter which one),
remove that tire/wheel for access and unbolt the strap-holder around the outer
end of the bar. Depending on how worn/deteriorated the outer bushings are,
you may be able to pull the bar right out without removing the second
strap-holder or wheel.
I assume yoiu're changing bars or at least the stock rubber bushings?
Good luck- J Deryke
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20131105/498febac/attachment.html>
More information about the DeTomaso
mailing list