[DeTomaso] Oil dipsticks that can actually be checked!

[Will Kooiman]

That doesn't tell all.

Someone responded to this thread earlier with the info that Rob needs.  I'll
have to search my inbox.

He needs to know the length from where the tube enters the block, until
where the oil needs to be when full.

So, if you put the dipstick in the tube, not mounted in the block, you can
measure the length of the tube to see if it is correct.

--
Will

From:  Mike Drew <MikeLDrew at aol.com>
Date:  Thursday, March 14, 2013 6:07 PM
To:  <rob at dumoulins.net>, Will Kooiman <will.kooiman at gmail.com>
Cc:  <detomaso at poca.com>, <coxmichaelt at gmail.com>
Subject:  Re: [DeTomaso] Oil dipsticks that can actually be checked!


In a message dated 3/14/13 12 58 45, rob at dumoulins.net writes:


> How long should the dipstick extend into the block past where the fill tube
> leaves the block? If I knew that answer I could tell if the vendor's
> contraption is right.


>>>The photos here reveal all:

http://www.poca.com/index.php/gallery/?g2_itemId=36086

Mike