[DeTomaso] Clutch Adjustments

Larry Finch fresnofinches at aol.com
Fri Jun 28 02:40:15 EDT 2013


One other issue that hasn't been mentioned is what happened to me when I replaced the
leaky seals in my internal hydraulic throwout bearing assembly. 

With nice, firm seals in the slaved throwout, the worn seals in the master started internally bypassing fluid.

A rebuild of the CNC clutch master finally put things right.

By all means try adjusting the pushrod length, but if that fails to resolve the problem, you might want to
start looking at the master.

Larry



More information about the DeTomaso mailing list