[DeTomaso] Worst possible project ever

[MikeLDrew at aol.com]

In a message dated 6/25/13 15 01 22, will.kooiman at gmail.com writes:


> The half shafts are splined.  There shouldn't be any damage - unless it
> was hit _really_ hard.
> 

>>>Yes, they are splined.   But they only have so much travel.   You 
probably only have about an inch, inch and a half before the two halves bottom out 
against one another.

Also, the gearbox is bolted to the chassis.   If the back of the chassis 
moves and the center doesn't, the input shaft will get tweaked.

Mike