[DeTomaso] Speedo died today
shawkins777 at comcast.net
shawkins777 at comcast.net
Sun Jun 16 14:57:39 EDT 2013
You can unhook the cable from the ZF and attach it to a drill and see if the problem is at the ZF or between the ZF and the speedo.
Steve
----- Original Message -----
From: "Rob Dumoulin" <rob at dumoulins.net>
To: "Pantera - Michael Shortt" <michael at michaelshortt.com>
Cc: "DeTomaso Mail List" <detomaso at poca.com>
Sent: Sunday, June 16, 2013 8:25:54 AM
Subject: Re: [DeTomaso] Speedo died today
Michael,
Undo the speedo cable from the speedometer and snake it such that you can
see the end when you start to drive. Make sure the cable is pushed in all
the way and has not pulled away internally from the ZF drive gear. If the
cable turns while you drive, it is working.
Rob DuMoulin
904.476.8744
rob at dumoulins.net
www.kbsi.co
http://www.linkedin.com/pub/rob-dumoulin/0/1b6/58
On Sat, Jun 15, 2013 at 8:46 PM, michael at michaelshortt.com <
michaelsavga at gmail.com> wrote:
> My speedo starting making a terribble noise this morning and it suddenly
> quit, ceased working with needle at 10 mph. Odo also not working of course.
>
> Not hearing any noise at all now.
>
> Before I hang upside down under the dash tomorrow, any suggestions, tips,
> hints or tricks.
>
> Thanks,
>
> Michael Shortt
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso
>
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list