[DeTomaso] Temp Gauge Sensor
MikeLDrew at aol.com
MikeLDrew at aol.com
Sun Jun 16 13:15:48 EDT 2013
In a message dated 6/16/13 10 03 7, MZadony at fleetresponse.com writes:
> Where is the temp gauge sensor on a 74 L ? Myron--the other guy in
> Cleveland.
>
>>>Originally, it was mounted in the pressure tank, which is dumb, as you
don't care how hot the tank is, you care how hot the ENGINE is. Most
replacement tanks don't have provisions for the temp sender, as they wisely want
you to move it to the front of the engine, where it should have been in the
first place.
De Tomaso just installed a plug there; the sensor replaces the plug. It
faces forward. As you view the engine from the cockpit, it is at the upper
left, front of the block, facing forward, above and to the left of the water
pump, and below the water pipe/thermostat. It is blocked by the
adjustment arm for the alternator, so the wire has to make an immediate 90-degree
bend as it comes off the sender.
Mike
More information about the DeTomaso
mailing list