[DeTomaso] Complete coolant flush ?
Asa Jay Laughton
asajay at asajay.com
Wed Jul 31 13:47:42 EDT 2013
- drain radiator as you already have.
- loosen both radiator hoses under the car at the front of the long undercar
tubes and let drain.
- remove the small pipe plugs in the block, near the front just above the
oil pan.
Asa
Sent using Jedi mind tricks.
-----Original message-----
From: David Moretto <niserybumchuckely at gmail.com>
To: detomaso at poca.com
Sent: Wed, Jul 31, 2013 16:32:04 GMT+00:00
Subject: [DeTomaso] Complete coolant flush?
Thanks to all for your suggestions.
I drained my coolant to get a base line on the oil/coolant issue.
The manual instructs to open petcock on the bottom of the radiator and
remove the pressure cap on the supply tank.
When I did that I only captured a little over 2 gallons of coolant.
The manual states there is 6 3/8 gallons in the system.
I understand there is water trapped behind the closed thermostat and water
in the heater line but 4 gallons and change?
What is the easiest way to drain ALL of my coolant?
David
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list