[DeTomaso] DeTomaso Digest, Vol 109, Issue 8

[Mikael]

Time to chime in... :-) I used two home made pieces of iron with a 90 degree
end. Insert through gills, turn 90 degrees, both hands at once, one at each
end, pull absolutely vertically. If pulled straight up like that, no post
will break

Mikael
-----Oprindelig meddelelse-----
Fra: JDeRyke at aol.com [mailto:JDeRyke at aol.com] 
Sendt: 9. juli 2013 09:16
Til: detomaso at poca.com
Emne: Re: [DeTomaso] DeTomaso Digest, Vol 109, Issue 8

If you know where the 6 posts are, a right-angle screwdriver work well for
lifting one section at a time. But NOTHING works 100% on every grille- you
WILL break a couple of the cast posts. The real problem is, the plastic
post-locks get hard & brittle, and don't flex open like they did in 1971.
There is no in-situ fix. Good luck- J Deryke