[DeTomaso] Wiring harness for 72 pantera

[michael@michaelshortt.com]

If one uses the Jon Hass headlight controller and wants to use the Cibie
Headlights, do you still also need the relays as well?

Michael




On Thu, Jan 17, 2013 at 12:19 PM, Will Kooiman <will.kooiman at gmail.com>wrote:

> I started with the Rick Moseley relay kit, but I switched to the Jon Haas
> headlight controller, which uses electronic switches instead of relays.
>
> One thing I like about the Jon Haas kit is it doesn't send power to the
> headlights while the lights are going up.  Once the lights are all the way
> up, the lights come on.  This design allows the lights to go up faster,
> since the motor gets full power.
>
> But that was a good catch.  My list should include relays or the headlight
> controller.
>
> --
> Will
>
> From:  Mike Drew <MikeLDrew at aol.com>
> Date:  Thursday, January 17, 2013 11:09 AM
> To:  Will Kooiman <will.kooiman at gmail.com>, <jjdetrich at gmail.com>
> Cc:  <detomaso at poca.com>
> Subject:  Re: [DeTomaso] Wiring harness for 72 pantera
>
>
> In a message dated 1/16/13 15 28 36, will.kooiman at gmail.com writes:
>
>
> > 10.  CIBIE headlights - recommended by Mike Drew - I like the frog eye
> > look.
>
>
> >>>You didn't mention it, but I hope you incorporated relays into the
> headlight
> circuit at the same time?   It's a must with high-powered headlights like
> those.
>
> Mike
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso
>



-- 







Michael L. Shortt
Savannah, Georgia
www.michaelshortt.com
michael at michaelshortt.com
912-232-9390


This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be legally
privileged.  If you are not the intended recipient, you are hereby notified
that any retention, dissemination, distribution or copying of this
communication is strictly prohibited.  Please reply to the sender that you
have received this message in error, then delete it.  Thank you