[DeTomaso] Sealing Campy Wheels

[Sam]

I did my wheels about 20 years ago and I used zinc chromate. Zinc chromate is good for aluminum and magnesium.  I got it from the Ditzler paint store since that was the campy paint I was going to use. The wheels still look brand new with no (zero) paint chipping. I would just recommend you use primer made by the company that made the paint you are going to use.

Here is a little blurb form the web:

Zinc Chromate vs. Zinc Phosphate Primers

Q. Please explain the basic differences (pro and con) of the two primers with regard to application. We're painting aluminum castings to be used in a salt-water marine environment. Which primer type would be more appropriate?
Thank you. 

A. Since you are coating aluminum castings for salt water marine water environment you will need excellent corrosion protection. Therefore, I would recommend zinc chromate over zinc phosphate. Many companies are moving away from zinc chromate because hexavanlent chromium is known to be a carcinogen. Therefore, if you decide to go that route, please be aware of OSHA's stringent regulations controlling hexavalent chromium (Cr VI) exposure. You are permitted to use the primer, but you are obligated to control the amount of Cr VI in the air and you must provide your painters with appropriate personal protective equipment (PPE).

I have not seen articles showing that zinc phosphate is equivalent to zinc chromate in terms of corrosion protection.

Finally, please be aware that the most critical aspect of the coating process is surface preparation of the aluminum castings. That is more important than your choice of zinc chromate versus zinc phosphate.