[DeTomaso] Another 408C on the dyno - TFS 2V heads andWilkinson exhaust

[doug351c]

Hi Dan,

I hadn't heard of Morel lifters before.   

They list 3 types for the 351C
http://johncalliesinc.com/morel_products.php

5323 T/B Street .700 roller
5327 T/B Street (HLT) .700 roller
5879 T/B Racing .750 roller

Which type went into this build? 
What does "T/B" mean
What does "(HLT)" mean
Are these retrofit for the 351C or do they need lifter sleeves?

Doug Braun

-----Original Message-----
From: detomaso-bounces at poca.com [mailto:detomaso-bounces at poca.com]On
Behalf Of Daniel C Jones
Sent: Friday, December 21, 2012 6:33 AM
To: Jeff Detrich
Cc: MikeLDrew at aol.com; detomaso at poca.com; Dave McLain; Mike McDougal;
Torben Thosing
Subject: Re: [DeTomaso] Another 408C on the dyno - TFS 2V heads
andWilkinson exhaust


> Dan, what do you reckon it would approximately cost to build this engine?

Dave's looking for the total cost and I'll forward a spreadsheet with
individual parts
cost that we used to estimate the build.

Dan Jones
_______________________________________________

Detomaso Forum Managed by POCA

DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso