[DeTomaso] bleeding clutch setup -cnc & pantera east setup
MikeLDrew at aol.com
MikeLDrew at aol.com
Wed Feb 6 19:11:13 EST 2013
In a message dated 2/6/13 15 49 45, will.kooiman at gmail.com writes:
>
> If you lift the clutch pedal while the bleeder is open, won't air get
> sucked back into the slave through the open bleeder screw? As opposed to
> refilling the master with more fluid?
>
>>>That's not ignorance, that's exactly right!
>
> >BTW, I usually hook a line from the bleeder screw to a speed bleeder cup.
> A line goes from the bleeder to a cup that catches the fluid. The cup has
> an extension that goes to the bottom on the inside of the cup. You always
> operate with a small amount of fluid in the cup, so it can never suck air.
> When air hits the cup, it bubbles to the top.
>
> >>>And that's sheer brilliance!
Mike
More information about the DeTomaso
mailing list