[DeTomaso] bleeding clutch setup -cnc & pantera east setup
dave londry
davel at emspace.com
Wed Feb 6 17:31:20 EST 2013
Bleed screw on slave is blocked, buggered or bashed?
dave
On 06/02/2013 2:02 PM, Brian Hill wrote:
> Hi all,
> reinstalled clutch slave after having ZF rebuilt. using CNC 3/4" master and Pantera East long throw slave. which was on the vehicle and working before the ZF overhaul. so typical, fix one thing and find more to fix.
>
> tried bleeding system with air powered vacuum on bleeder of slave and nothing is coming out.
>
> disconnected everything and cleared the pipe with no problem. Reconnected everything...holding fluid but I have zero pedal.
> Reservoir is full and stays at full level regardless of what I do...i.e. pump pedal or use vacuum.
> So I need some fresh thoughts about this. Why am I not getting fluid through the slave.
>
> Thanks
> Brian
> Fulshear,Texas
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso
>
>
More information about the DeTomaso
mailing list