[DeTomaso] H/L microswitch

[MikeLDrew at aol.com]

In a message dated 8/6/13 21 24 50, mazdastuff at yahoo.com writes:


> Hi guys, thanks for all the input.  I have a '71 model, the old radiator 
> was a Fluidyne that developed a leak.  I purchased a Hall radiator.  Now, 
> allow me to say that the Fluidyne was never a precise fit...and the Hall may 
> end up being the same if I cannot find a proper switch.  But the bushings 
> I am using with the Hall will seat into the holes perfectly.   Versus just 
> setting on top of the brackets.   I took a straight edge to the radiator 
> support area...it's off about 5mm which is what I need.
> 

>>>Can you send photos of your current switch setup so we can see what you 
have?

Mike