[DeTomaso] H/L microswitch
Brian
mazdastuff at yahoo.com
Wed Aug 7 00:24:33 EDT 2013
Hi guys, thanks for all the input. I have a '71 model, the old radiator was a Fluidyne that developed a leak. I purchased a Hall radiator. Now, allow me to say that the Fluidyne was never a precise fit...and the Hall may end up being the same if I cannot find a proper switch. But the bushings I am using with the Hall will seat into the holes perfectly. Versus just setting on top of the brackets. I took a straight edge to the radiator support area...it's off about 5mm which is what I need.
Thanks
Brian
Sent from The Republic of Texas
On Aug 6, 2013, at 4:02 PM, Brian <mazdastuff at yahoo.com> wrote:
I am changing out radiators and the new radiator butts up against the microswitch for the headlights...I believe that is the UP one. To the point that I cannot get the radiator to fit into the mountings holes securely.
Slotting the holes at the bottom is an option for someone with skill & tools..( I have neither )
So I am opting to find a narrow micro switch...but can someone tell me...is the switch a SPDT? The sites like DigiKey & Grainger list so many I am not sure what to look for.
Thanks
Brian
Sent from The Republic of Texas
_______________________________________________
Detomaso Forum Managed by POCA
DeTomaso mailing list
DeTomaso at poca.com
http://poca.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list