[DeTomaso] Clutch master swap out
MikeLDrew at aol.com
MikeLDrew at aol.com
Fri Apr 12 12:51:07 EDT 2013
In a message dated 4/12/13 8 20 27, larry at ohiotimecorp.com writes:
> Lets say that the push rod is to long now. We have the clutch peddle all
> the way up on its rest. As you bolt on the MC it is pushing the piston up
> in the bore of the MC. This can cause problems if it starts to cover ports
> or if it travels too far into the MC. By shimming the MC out (away) from the
> mounting box you are allowing the MC piston to come to its normal resting
> position. It is acting as if the rod was shorter.
>
>>>Ah yes, that makes perfect sense. I never considered the possibility
that the pushrod was so misadjusted that it was partially compressing the
piston when at rest because the pedal was hitting the 'up' stop.
Mike
More information about the DeTomaso
mailing list