[DeTomaso] Skinny spare

[JDeRyke at aol.com]

A Pantera hub mic's 2.038" by my tool, and has a small chamfer at the 
bottom. You don't want to make the fit too tight or removal becomes a problem, 
especially if/when a little corrosion gets in between. I made a set of wheel 
spacers for a friend who insisted on a nice close fit.... and while they went 
together with fingers, he had to use chisels and a pry bar to remove them 6 
months later. I'd shoot for 2.050" OD. Good luck- JD