[DeTomaso] Key difficult to turn
John Taphorn
jtaphorn at kingwoodcable.com
Wed Oct 10 21:17:03 EDT 2012
I vote remove, open up and clean. Directions at Pantera Place are easy
to follow.
JT
On 10/10/2012 9:31 AM, Guido deTomaso wrote:
>
> For a while now ( years, a couple drives ) the ignition key has been very
> difficult to turn, like get the vice grips. It moves easily from the
> "locked/key out" position to the "unlocked/ACC" position, but then is very
> difficult to turn to the "ignition on" position, the moves to "start" normally.
>
> Slow steady pressure on the key seemed to work better than merely forcing it.
>
> Or so I seem to recall. Last night to better document the phenomenon, I paid
> close attention only to find the problem has gone away, which is somehow more
> worrisome.
>
> My hunch has always been the electrical switch not the tumbler was the root
> cause, though I've never observed or understood the tiny spring / tumbler moves
> in and out action.
>
> Leave it alone? Remove and open up the electrical switch and clean the
> contacts?
>
> I might instead take this as a warning and work on re-routing the fan current
> away from the switch.
>
> Thanks,
>
> GD
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at realbig.com
> http://realbig.com/cgi-bin/mailman/listinfo/detomaso
>
More information about the DeTomaso
mailing list