[DeTomaso] outside rearview mirror adhesive problem

[Dave]

Steve,
Call Wilkinson, ask what he uses. Then call PI & ask the same. See what they say.
IndyDave

Hey Larry!

-----Original Message-----
From: Larry - Ohio Time Corp [mailto:larry at ohiotimecorp.com] 
Sent: Wednesday, November 28, 2012 10:17 AM
To: 'Lotus Esprit'; 'DeTomaso Mail List'
Subject: Re: [DeTomaso] outside rearview mirror adhesive problem

Hi Steve,

I know 3M makes a two sided "trim" tape that is very strong (costly too) and holds up well outside on cars. I have never used it on a mirror, but it has worked well on some spoilers, ect. It may work for you.

Larry (sticky) - Cleveland 




-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On Behalf Of Lotus Esprit
Sent: Tuesday, November 27, 2012 6:54 PM
To: POCA
Subject: [DeTomaso] outside rearview mirror adhesive problem

Guys, I need suggestions about how to "permanently" stick my Wilkinson outside rearview mirror on my P car's door/window. I bought the little mirrors Steve sells several years ago. I used 3M double sided tape and it worked fine, for about a year. Then started to pull away at the top of the contact area. The sticky sides don't pull away from the glass or mirror surface. The tape stretches out from the top due to (I think) the weight of the mirror, driving vibrations, getting hot from the sun etc. This will be the third time I've had to reattach the mirror. The driver's side was put on with a glue at PI Motorsports, maybe epoxy (?) and I've not had any problem with that side. Just the 3M tape side. would epoxy bond glass and the plastic or fiberglass the mirror is made of?  Many thanks for any help!
 
Steve Griffin 6661
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at realbig.com
http://realbig.com/cgi-bin/mailman/listinfo/detomaso