[DeTomaso] Wheel Stud help

[gow2 at rc-tech.net]

I have the wilwood hats and it was assembled with the hats on the outside'
I think when Quella did the brake upgrade on the car many years agp.

> Are the GR4 brake hats/disks different?  I thought that the shoulder was
> needed to position the disks.
>  
> Ken
>
>
> ________________________________
> From: "gow2 at rc-tech.net" <gow2 at rc-tech.net>
> To: detomaso at realbig.com
> Sent: Monday, November 26, 2012 7:21 AM
> Subject: [DeTomaso] Wheel Stud help
>
> Trying to locate the proper extended wheel stud.
>
> The GR4 wheels require longer studs (No spacers). I got studs form Hall
> which look like this:
>
> http://hallpantera.com/cgi-bin/p/awtp-product.cgi?d=hallpantera-inc&item=22422
>
> They worked fine for the front. The rear stud is different. It looks like
> this:
>
> http://www.precisionproformance.com/images/wt2032.jpg
>
> It does not use the shoulder and would not work. The studs are M12x1.5 and
> the length was 2.25". I need longer studs for full thread engagement ont
> he nuts but I am not finding studs with the wide shoulder.
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at realbig.com
> http://realbig.com/cgi-bin/mailman/listinfo/detomaso