[DeTomaso] Vehicle Speed Sensor
David Nunn
dnunn at telus.net
Wed Nov 21 22:01:31 EST 2012
Asa Jay,
I believe BWD part number S8382 will work. I haven't tried it myself but I
believe I read here on the forum that someone had used this part when they
installed cruise control in their Pantera. Here's what I have written in my
notes about it: this is a Hall effect VSS which will mate with the ZF angle
drive and speedo cable. It Requires +12 volts on
the Black/Brown wire, Chassis Ground on the Brown wire, and the +9.5 to 0
volt square wave output is on the Yellow/Brown wire at 8 pulses/rev (~8,000
pulses/mile).
More information about the DeTomaso
mailing list