[DeTomaso] Water temp gauge change with headlights
shawkins777 at comcast.net
shawkins777 at comcast.net
Tue May 29 14:49:47 EDT 2012
I like Mikes idea, I work in the wholesale electric generation business and it's common on the electronics to daisy chain grounds but you need to have the proper size wire to do this.
Steve
----- Original Message -----
From: MikeLDrew at aol.com
To: SOBill at aol.com
Cc: detomaso at realbig.com
Sent: Tuesday, May 29, 2012 2:18:11 AM
Subject: Re: [DeTomaso] Water temp gauge change with headlights
In a message dated 5/28/12 22 17 20, SOBill at aol.com writes:
>
> The solution is run a separate ground wire from the temp gauge ground
> terminal directly to the chassis.
>
> The proper way to ground anything is the eliminate "daisy chained"
> grounds in which the ground current from one circuit can mix with the ground
> current from another circuit. But this takes a lot more wire and fabrication
> time. Each component should have it's own, separate ground to the chassis.
>
>
My thought was to run a big, meaty ground wire from the water temp gauge to
ground. The fact that the other gauges are tied in to it means they
should benefit as well.
Maybe a project for tomorrow...we'll see....
Mike
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list