[DeTomaso] second update on clutch slave not compressing fully
Pantdino
pantdino at aol.com
Sat May 12 21:05:19 EDT 2012
That occurred to me too. But since the system is under pressure I won't even need the spring on. I suspect that when I crack the bleed nipple loose the arm will move and I'll have play again. With the spring on you can't evaluate for play without taking it off again
Jim
-----Original Message-----
From: John Buckman <jb841 at cox.net>
To: detomaso <detomaso at realbig.com>
Sent: Sat, May 12, 2012 5:54 pm
Subject: [DeTomaso] second update on clutch slave not compressing fully
Jim,
With the spring installed, try opening the slave's bleeder screw slightly to see
f the slave retracts further
i.e. the stop bolt comes to rest at its stop). Also check for free play at
he master cylinder's pushrod. The
ushrod needs to be touching the retaining washer in the master cylinder. You
an't see the forward end
f the pushrod, as it's inside the master cylinder. You may have to pull the
in from the pushrod's yoke to
heck.
John
______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
eTomaso at list.realbig.com
ttp://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list