[DeTomaso] Sending Unit Fail?
cengles at cox.net
cengles at cox.net
Tue Jun 12 09:19:29 EDT 2012
Dear Trip,
In my limited experience, I have installed two new units
over the last twenty years. The first one was a slam dunk without
problems. The second one was new, but modified with a larger fuel tube.
Installation was problematic due to rubbing inside the tank, but after
tweaking, it does work despite all the bumps and work it has been
subjected to. I suppose a new unit could fail. In the bigger
electrical area, I am ignorant and would defer to anyone with expertise.
Warmest regards, Chuck Engles
On Tue, Jun 12, 2012 at 6:53 AM, Trip Owen wrote:
> Subject: Fuel GaugeI am not getting a reading on my fuel gauge. I
> have a new sending unit. Ground is ok - and some voltage is getting
> to yellow (power) wire. Has anyonehad a new sending unit fail? It is
> not rubbing against fuel tube, or inside of tank? Any other ideas of
> what to check. Other gauges work.thanks, Trip88 GT5S
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at
> http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list