[DeTomaso] Best place to hook up a new circuit
SOBill at aol.com
SOBill at aol.com
Sun Jul 22 13:56:13 EDT 2012
Ah, the *best* place.
IMNSHO (In My Not So Humble Opinion)
The best place is to connect the lamp power is the load terminal of the
ammeter. The ammeter load terminal is the terminal with the big wire that
doesn't go to the battery. This connection allows the alternator to provide
the current to the lamps while maintaining correct functioning of the
ammeter. For a picture of the ammeter terminals, see
_http://www.panteraplace.com/Electrical/Ammeter%20Wiring.jpg_
(http://www.panteraplace.com/Electrical/Ammeter%20Wiring.jpg)
If you connect the lamp power to the battery, lamp current will indicate
on the ammeter as a battery charging current when the alternator is
supplying the load. If the alternator is not supplying the load, the drain on the
battery due to the lamps will not be indicated on the ammeter.
The actual lamp circuit should contain a relay which connects lamp power
from the ammeter terminal when you want the lamps activated.
Have fun today,
_sobill at aol.com_ (mailto:sobill at aol.com)
More information about the DeTomaso
mailing list