[DeTomaso] Headlight Buckets
JDeRyke at aol.com
JDeRyke at aol.com
Sat Jul 21 15:43:22 EDT 2012
First, check to see if in fact your buckets are the serialized ones for
that car. If so they will have the actual s/n stamped in the bottom of the
buckets (cannot be seen unless removed). Replacement buckets may not fit well no
matter what you do as, there were at least two different buckets.
Second. shimming to align headlight buckets must be done in two planes:
back & forth on the stock-huge holes, and up/down with shim washers or a
hammer. Our minds don't work well in two planes, so this adjustment is NOT
intuitive. A further complication is the possible loss of the stock plastic
bushings on both ends of the raise/lower bar that causes random shifts in bucket
position, or collision damage that used one or both replacement fenders with
different sized openings. Good luck- J Deryke
More information about the DeTomaso
mailing list