[DeTomaso] modular engine questions
Forest Goodhart
forestg at att.net
Wed Feb 29 17:39:29 EST 2012
Steve Wilkenson told me he uses the stock bell housing. I think something has to
be trimmed from the heads for chassis clearance.
Steve,
Are you sure your tranny has the bell housing attached?
Forest
________________________________
From: Will Kooiman <wkooiman at earthlink.net>
To: steven.liebenow at att.net; mailing list detomaso <detomaso at realbig.com>
Sent: Wed, February 29, 2012 1:41:15 PM
Subject: Re: [DeTomaso] modular engine questions
My mistake. I know I saw somewhere that they used the same bellhousings,
but I trust you, plus I was able to confirm from several sources. I don't
know where the misinformation started.
-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of steven.liebenow at att.net
Sent: Wednesday, February 29, 2012 2:37 PM
To: mailing list detomaso
Subject: [DeTomaso] modular engine questions
All,
The 4.6 and the new 5.0 do NOT have the same bolt pattern as a SBF! Not
sure
how this keeps getting propagated.....
I have a 5 speed from a 4.6 sitting in my back yard, and I specifically
compared
the block mounting pattern to that of my SBF and very little if anything
lines
up!
You would need to run whatever adapter situation people are running
currently to
have 4.6 or 5.4L power!
Steve
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list